Bed bug control in Qurtubah, Makkah

Targeted, not broadcast

Product goes into cracks and runways, never sprayed across open surfaces.
Told before we start

What we will use, where it goes, and what to cover or move before we arrive.
A follow-up visit

We return after the first treatment, because what survives it does not show on the day.
Homes and businesses

Apartments and villas, and kitchens and stores that need a record of each visit.

Why they keep coming back in Qurtubah

Call outs here often start in a worker's room attached to a workshop or warehouse rather than the main house, so the first bed we inspect is usually that one. The method is set out in full on the full Bed bug control page.

The first reason

Housing pressed against the workshops on Al Hajj Street

Many Qurtubah homes sit directly against workshops and warehouses on the same street, with front doors opening onto loading yards where workers move between storerooms and attached quarters, bringing the bed close to a source of infestation that purely residential streets never see.

The second reason

Goods passing through Al Dawas Market and Souq Al Hijaz

Secondhand furniture and bedding move along Al Hajj Street from Al Dawas Market and Souq Al Hijaz before settling into a house or a nearby shop, a route entirely different from the way bed bugs pass between relatives in the old dense districts.

The third reason

New, spaced out schemes behind the industrial plots

Behind the workshops towards the third ring road, newer housing schemes sit at lower density, with concrete walls rather than stone and more distance between houses, so treatment here deals with new furniture and attached worker rooms rather than shared old walls.

Landmarks of Qurtubah

Work in Qurtubah is organised around two fixed points, the workshops lining Al Hajj Street and the stalls around Souq Al Hijaz, so a visit is scheduled by whichever one sits closer to the house being treated.

Al Hajj Street
Third Ring Road
Al Dawas Market
Souq Al Hijaz

Before treatment

The places that decide the treatment

Fuel stations sit at the junctions along Al Hajj Street, drawing transport trucks that park for long stretches close to the housing schemes behind the workshops and warehouses.

The stitched piping along the edge of a mattress

The mattress seam

In the worker's rooms attached to the workshops, the mattress seam is checked first, since it is the bedding most likely to be shared between shifts.

A wooden bed frame and its slats seen from below

Frame joints and screw holes

Furniture bought recently from Al Dawas Market often arrives flat packed, so we check the frame joints and screw holes closely when it is put back together.

An upholstered headboard fixed to a bedroom wall

The headboard and the wall behind it

In the newer schemes behind the workshops the wall is fresh concrete, so checking the headboard and the space behind it needs no cutting or drilling.

What the bedding shows

Dust and light oil marks from the nearby workshops can look like insect staining on fabric, so we separate a workshop mark from an actual bed bug trace.

A fabric sofa and the seam of its cushion

Sofas and armchairs

Some of the larger workshops on Al Hajj Street keep a reception corner with sofas for workers and customers, and these need the same check as sofas at home.

An open suitcase on a luggage rack in a room

Luggage and second hand furniture

Second hand furniture arriving from Al Dawas Market or Souq Al Hijaz gets checked before it enters the house or the warehouse attached to it.

How we work

1
Inspect and map the spread

We strip the bed and work through the mattress and base seams, the frame joints, the headboard and the skirting, then check the upholstered furniture and the neighbouring rooms to see how far it has gone.
2
Laundry, heat and steam

Bedding is bagged and sealed inside the room, then washed and dried hot. Steam runs along the seams and edges, because heat reaches the cemented eggs that a liquid never will.
3
Targeted, non-repellent application

A non-repellent product goes onto the harbourage itself, with a dust into voids and screw holes. We do not use a repellent aerosol, because it drives the insect deeper into the wall and into the next room.
4
Monitoring and the follow-up visit

A sealed encasement goes onto the mattress and the base, with monitors under the bed legs, then we return once the remaining eggs have hatched and re-treat anything still active.

What bed bug control includes

A recorded inspection

Mattress and base seams, frame joints, the headboard, the skirting and every upholstered piece in the room.
Steam and targeted application

Steam along the seams and edges, and a non-repellent product on the harbourage itself, not on the surfaces you sleep on.
Voids and pipe entries

Behind the skirting, around pipe entries and under socket plates, which is the route from one unit to the next.
Monitors under the bed legs

Checked at every visit, they show remaining activity before the bites do.
Laundry, encasement and aftercare

The hot wash and dryer routine, a sealed encasement on the mattress and base, and what must not be carried out of the room.
A follow-up timed to the hatch

A date set on the hatch, and re-treatment of anything still active.

What is different about Al Maabdah Sub-Municipality

Al Maabdah sub municipality climbs from Al Abtah and Al Jumayzah beside the Al Mualla cemetery up through Al Khansa and Rai Adhakhir to Al Adl, Jabal Al Nour, Wadi Jaleel and Qurtubah on the outer ring roads. It mixes hotels and pilgrim housing near the Grand Mosque with old popular houses on hillside passes, new housing schemes on valley floors that carry flash floods after rain, and industrial plots, workshops and warehouses along Al Hajj Street in Qurtubah. Street widening and expropriation leave partly demolished frontages in Al Khansa.

Questions about this district

We live in a flat above our family workshop on Al Hajj Street, does that change the inspection?

The approach stays the same, but we check the bedrooms that sit right against the workshop ceiling and any vent between the two spaces, since that is the most likely path the pest could take.

We rent a room near the loading yard to the workshop worker, does his bedding need its own check?

Yes, the worker's room counts as its own sleeping space, so the mattress and its seams are checked the same way as any bedroom in the main house, especially if more than one worker uses it.

We bought used mattresses from Al Dawas Market, do they need checking before they enter the house?

Yes, any mattress coming from an open market like Al Dawas Market should have its seams and edges checked before it goes indoors, since that is the fastest way the pest reaches a house that has never had it.

Our house in the new scheme behind the industrial plots is far from neighbours, does that lower the risk?

Distance stops the pest moving straight from a neighbour's house, but homes in this scheme still bring in new furniture and take deliveries constantly, so the risk here travels with the item rather than through a shared wall.

Delivery trucks park overnight at the nearby fuel station, can bed bugs spread from there to our house?

It is unlikely, since the pest does not travel through air or across distance, but it can arrive with a driver who sleeps in the cab and later sits in a nearby house or leaves belongings there.

We store extra warehouse goods in the house garage, does that need checking too?

Yes, a garage that regularly receives goods from the warehouse should be checked from time to time, particularly if boxes or fabric pass through it before being stored or moved on to another house.

How much does bed bug control in Qurtubah cost?

It is set after the inspection, because the price follows the type of infestation, the size of the space, how far it has spread and the number of visits it needs. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Qurtubah.