Bed bug control in Al Sanabel, Makkah

Targeted, not broadcast

Product goes into cracks and runways, never sprayed across open surfaces.
Told before we start

What we will use, where it goes, and what to cover or move before we arrive.
A follow-up visit

We return after the first treatment, because what survives it does not show on the day.
Homes and businesses

Apartments and villas, and kitchens and stores that need a record of each visit.

Why they keep coming back in Al Sanabel

The gaps between neighbouring flats are very narrow and bed bugs need only a small opening. A simple crack in a wall allows them to move between units in a single week. The method is set out in full on what Bed bug control involves.

The first reason

Thin shared walls and internal runs

Walls between neighbouring flats may be thin, and gaps round pipes and cables offer passages. Bed bugs move from an infested flat to the next through these openings unseen and untouched by surface sprays.

The second reason

Small flats and crowded furniture

The small flat holds a bed, sofa and wardrobes in tight space. Bed bugs move easily between pieces of furniture, and every item may be contaminated. Quick cleaning does not reach all the harbourage.

The third reason

Second hand furniture and warehouse stock

Flats in Al Sanabel are comparatively old, and furniture moves from one unit to another or from nearby storage. Every move is a chance for bed bugs to spread to a new unit.

Landmarks of Al Sanabel

Work in Al Sanabel is organised around King Khalid Road, which bounds the district from the north, and the Makkah Development Commission offices, which mark its eastern edge.

King Khalid Road
Third Ring Road
Muzdalifah Road
Makkah Development Commission
Al Iman Mosque
Al Mousa Park

Before treatment

The places that decide the treatment

Small apartment blocks on a tight grid with shared walls, sewage pipes and electrical runs that connect the units to one another.

The stitched piping along the edge of a mattress

The mattress seam

The mattress seam in the small flat sits close to the shared wall, and bed bugs in it may gradually move towards the gaps in the wall.

A wooden bed frame and its slats seen from below

Frame joints and screw holes

Frame joints and gaps round screw holes provide safe passages for bed bugs to reach the walls and pipes between flats.

An upholstered headboard fixed to a bedroom wall

The headboard and the wall behind it

The headboard and the wall behind it are tight against the shared wall, and pipes or cables may run between them.

What the bedding shows

The bedding in the cramped flat may touch the shared wall, making direct movement of bed bugs from the neighbouring flat easy.

A fabric sofa and the seam of its cushion

Sofas and armchairs

Old sofas and armchairs may be contaminated from the start, especially if they came from another flat or storage.

An open suitcase on a luggage rack in a room

Luggage and second hand furniture

Luggage and suitcases under the bed may carry bed bugs from the neighbouring flat or from the market, and the new house may become infested before the case is opened.

How we work

1
Inspect and map the spread

We strip the bed and work through the mattress and base seams, the frame joints, the headboard and the skirting, then check the upholstered furniture and the neighbouring rooms to see how far it has gone.
2
Laundry, heat and steam

Bedding is bagged and sealed inside the room, then washed and dried hot. Steam runs along the seams and edges, because heat reaches the cemented eggs that a liquid never will.
3
Targeted, non-repellent application

A non-repellent product goes onto the harbourage itself, with a dust into voids and screw holes. We do not use a repellent aerosol, because it drives the insect deeper into the wall and into the next room.
4
Monitoring and the follow-up visit

A sealed encasement goes onto the mattress and the base, with monitors under the bed legs, then we return once the remaining eggs have hatched and re-treat anything still active.

What bed bug control includes

A recorded inspection

Mattress and base seams, frame joints, the headboard, the skirting and every upholstered piece in the room.
Steam and targeted application

Steam along the seams and edges, and a non-repellent product on the harbourage itself, not on the surfaces you sleep on.
Voids and pipe entries

Behind the skirting, around pipe entries and under socket plates, which is the route from one unit to the next.
Monitors under the bed legs

Checked at every visit, they show remaining activity before the bites do.
Laundry, encasement and aftercare

The hot wash and dryer routine, a sealed encasement on the mattress and base, and what must not be carried out of the room.
A follow-up timed to the hatch

A date set on the hatch, and re-treatment of anything still active.

What is different about Al Aziziyah (Makkah) Sub-Municipality

Al Aziziyah sub municipality runs from the Bin Dawood markets to the Al Hada road and carries pilgrim traffic to Mina. Hotel towers and furnished apartment blocks fill and empty with the Hajj and Ramadan seasons, and the kitchens, restaurants and markets along Al Masjid Al Haram Road and King Abdulaziz Road leave food waste at every peak. Southwards the fabric loosens into villas and planned streets in An Naseem and Al Awali, then Al Abidiyah's campus and the old farms of Al Husayniyah, where Wadi Uranah holds water after rain and farm enclosures shelter rodents and reptiles.

Questions about this district

Do shared walls between neighbouring flats in Al Sanabel let bed bugs spread easily?

Yes, thin walls and gaps round pipes make movement easy. Treating one flat is not enough; inspection decides which neighbouring flats are infested.

Must every flat in the building be treated if one has bed bugs?

Not necessarily the whole building, but flats on the same floor and the units directly above and below the infested one may be affected. Inspection sets the minimum scope.

Can second hand furniture from Al Sanabel flats carry bed bugs into a new home?

Second hand furniture from an old flat or storage facility may be contaminated. Buying used pieces without checking may bring bed bugs into the new house.

Does moisture round the pipes and drains favour bed bug survival and breeding?

Moisture round pipes keeps bed bugs healthy and speeds breeding. Treatment of gaps round pipes is essential.

How long does it take bed bugs to cross from one flat to the next through the shared wall?

Bed bugs can move in days if the gap exists. Do not wait for symptoms in the neighbouring flat; pre-emptive treatment is better.

Is spot treatment of gaps and joints enough to stop bed bugs crossing between flats?

Spot treatment of gaps and joints is important, but the flat itself must be treated fully, including seams, frame and furniture.

How much does bed bug control in Al Sanabel cost?

It is set after the inspection, because the price follows the type of infestation, the size of the space, how far it has spread and the number of visits it needs. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Al Sanabel.