Tank leak repair in Al Harah Al Janubiyah Jeddah
Al Harah Al Janubiyah extends south towards Dhahban and the bridge, with popular housing along inner streets and open edges facing farmland and empty ground. Tanks here are far from oversight and maintenance is not easy to reach, so leaks may go unnoticed for weeks. We diagnose by closing both valves and watching the level to pinpoint where the water is actually being lost.
-
Potable-rated materials
Linings and disinfectants cleared for drinking water tanks, not general-purpose products.
-
You get the downtime first
How many hours the tank is out of service, told before we start rather than after we finish.
-
A first-draw flush
We run the first draw off after refilling, and the tank is not handed back until the water runs clear.
-
Ground and roof tanks
Villas, apartment blocks and premises that need a written record of each visit.
Why the job is different in Al Harah Al Janubiyah
Many tanks here sit on bare ground away from the building, exposed directly to sun, wind and weather. The method is set out in full on what Tank leak repair involves.
Exposed tanks subject to weather
Tanks sit in direct sun and salt wind, speeding corrosion of metal and concrete. Daily temperature swings cause expansion and contraction, creating fine cracks that grow.
Long pipes from building to tank
Distance from building to tank is considerable, and pipes are exposed to sun and ground moisture. Joints and connections on long pipe runs are many weak points.
Leaks may go unnoticed for weeks
Tanks are out of sight and away from daily view. Slow leaks can persist for weeks. Only a high water bill or damp ground around the tank raises alarm.
The character of Al Harah Al Janubiyah
Mixed district: shops at street level with homes above them
Al Harah Al Janubiyah with its open edges and exposed tanks means repair work requires longer tool and material runs. Tanks are distant from buildings and street, so work needs extra time and planning.
Where the water leaves decides how it is repaired
The southern part of Thuwal town with popular housing on inner streets and open edges facing farmland and empty ground, extending south towards Dhahban and the causeway.
Damp and salt on the outside wall
Rust and corrosion start from below and sides where ground moisture and salt pool.
The kind of crack
The pipe inlet and connections on long pipe runs are critical points under constant pressure and movement.
The wall to floor junction
The float valve on exposed tanks corrodes fast from direct weather exposure.
Pipe entries
Fine cracks widen with daily thermal cycles due to large temperature swings between morning and evening.
The condition of the old lining
Tank floor collects wind-blown sand, which blocks the outlet or causes leaks beneath.
What the tank is made of
Slow leaks spill around the tank base leaving permanent dampness and waterlogged soil.
How we work
-
1
Inspect and locate the leak
We close the float valve and the outlet, mark the water level and watch it fall, then check the fittings and the wall beside it. That separates a tank leak from a pipe leak or a float valve that never shuts.
-
2
Drain, clean and dry
We empty the tank, lift the sediment off the base, wash back to sound concrete and let the surface dry. No repair holds on a damp or dusty face.
-
3
Repair the cracks and the entries
We cut the crack open, fill it with a non-shrink mortar, inject anything still weeping and rebuild around the pipe sleeve. A joint that moves takes a flexible detail, not a rigid one.
-
4
Refill, test, then sterilise
We refill, read the level again to confirm the drop has stopped, then sterilise before the water is used, because the tank has been open with tools and hands inside it.
What tank leak repair includes
-
A marked level test
A reading before and after with everything shut, which establishes that the loss is the tank and not the plumbing.
-
Draining and sediment removal
Water and silt out of the base, so the floor and the walls can be seen as they really are.
-
Pressure wash and dry back
The weak layer and the dust come off, because a repair only holds on sound concrete.
-
Cracks opened and filled
The crack is cut open and filled with a non-shrink mortar, and anything still weeping under water pressure is injected.
-
Refill and a recorded test
We refill, read the level again and write the reading down, so the result is not a matter of opinion.
-
Sterilised and back in service
A wash and a sterilisation once the material has cured, and guidance on running the first fill off before the water is used.
What is different about Thuwal Sub-Municipality
Thuwal sub municipality is a small fishing town on the Red Sea coast at the far northern edge of Jeddah governorate. Its old quarters are closely packed popular and mud built houses on narrow streets, with newer low rise concrete homes from the town's development programme beside them. Sea humidity stays high all year, the fishing harbour and the corniche form its seafront, water arrives by tanker so household tanks are everywhere, and the town sits on Wadi Thuwal, ringed by open ground and by the irrigated green campus of King Abdullah University of Science and Technology.
Questions about this district
Why do exposed tank leaks worsen in extreme heat?
Heat causes tank metal and concrete to expand, and night contraction creates fine cracks that grow. Metals corrode faster in high temperatures.
Do long pipes leak more than the tanks themselves?
Often they do. Long pipes have many joints and connections, each a potential leak point. We test the tank first by closing valves to isolate the real source of loss.
Can a tank be repaired in place without moving it?
Yes. We drain, clean and dry the tank in place, then repair it there. Moving an exposed tank is difficult and unsafe.
Is dampness on the ground around the tank a sign of leaking?
Usually yes, a strong one. Ground dampness around the base signals a leak from below or the side.
Do concrete tanks tolerate direct sun better than metal ones?
Concrete handles heat better but cracks under severe drying and thermal strain. Metal corrodes faster but is less prone to cracking.
How often should exposed tanks be inspected?
At least monthly or every two months, especially in summer. Small leaks progress quickly under harsh conditions.
How much does tank leak repair in Al Harah Al Janubiyah cost?
It is set after the inspection, because the price follows the type of infestation, the size of the space, how far it has spread and the number of visits it needs. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Al Harah Al Janubiyah.
Nearby districts we cover
Other services in Al Harah Al Janubiyah
Other services we provide to residents of Al Harah Al Janubiyah.
-
Water tanks
Water tank cleaning
-
Water tanks
Water tank sterilization
-
Water tanks
Water tank sealing
-
Residential
Cockroach control
Need tank leak repair in Al Harah Al Janubiyah? Tell us what you saw and we will tell you what it needs
We reach Al Harah Al Janubiyah at a time we agree, and you get the full cost before we start.