A technician checking the inside wall of a concrete water tank with a torch
What our clients rate us

Tank leak repair in North Obhur Jeddah

North Obhur stretches along Jeddah's northern coast on the north bank of Sharm Obhur, lined with villas, rest houses and beachfront resorts. Tanks here face continuous salt stress from marine air and very high coastal humidity, and pipe leaks emerge quickly in exposed external pipework running from tank to building.

  • Potable-rated materials

    Linings and disinfectants cleared for drinking water tanks, not general-purpose products.

  • You get the downtime first

    How many hours the tank is out of service, told before we start rather than after we finish.

  • A first-draw flush

    We run the first draw off after refilling, and the tank is not handed back until the water runs clear.

  • Ground and roof tanks

    Villas, apartment blocks and premises that need a written record of each visit.

Why the job is different in North Obhur

Tanks on the northern beach face salt and atmospheric humidity of the highest intensity, especially in summer and during easterly winds. The method is set out in full on what Tank leak repair involves.

The first reason

Overhead tanks facing the sea directly

Villas and resorts on the seafront use overhead tanks facing the water head-on. Salt, moisture and harsh air cause rapid corrosion of metals and joints.

The second reason

Long pipe runs from tank to building

Premium resorts and villas require long pipe runs from the overhead tank to the building. These pipes face salt spray, expansion-contraction stress and weak joint points.

The third reason

Intense and unrelenting atmospheric humidity

The beachfront location means very high humidity year-round. Tank and pipe absorb moisture from inside and out, causing accelerated corrosion.

The character of North Obhur

Coastal area: high humidity and salt air through the year

A premium beachfront zone means villas and resorts are relatively new but tanks and pipes face the harshest marine conditions. Repair must account for salt pressure and very intense atmospheric humidity.

Before treatment

Where the water leaves decides how it is repaired

A northern coastal strip on the north bank of Sharm Obhur, lined with premium villas and beachfront resorts, crossed by Prince Abdullah Al Faisal Street, holding the Jeddah Tower site and Jeddah Economic City.

A concrete wall marked with damp and a white salt bloom

Damp and salt on the outside wall

Testing float valve and main outlet determines whether loss is from the tank body or long external pipes.

A fine crack running across a concrete surface

The kind of crack

Draining and fully drying the tank is essential, and high atmospheric humidity may extend drying time.

The corner where a concrete floor meets a wall

The wall to floor junction

Inspecting pipe entries and connection joints reveals leaks at welds exposed to continuous salt spray.

Water pipes passing through a concrete wall

Pipe entries

Inspecting tank walls inside and out reveals salt-corrosion marks and stress cracks.

A blistered and peeling layer on a concrete surface

The condition of the old lining

Inspecting foundations and soil around the tank determines whether groundwater pressure exists.

A white plastic water tank standing outside

What the tank is made of

Inspecting any existing tank lining reveals its condition before new application.

How we work

  1. 1

    Inspect and locate the leak

    We close the float valve and the outlet, mark the water level and watch it fall, then check the fittings and the wall beside it. That separates a tank leak from a pipe leak or a float valve that never shuts.

  2. 2

    Drain, clean and dry

    We empty the tank, lift the sediment off the base, wash back to sound concrete and let the surface dry. No repair holds on a damp or dusty face.

  3. 3

    Repair the cracks and the entries

    We cut the crack open, fill it with a non-shrink mortar, inject anything still weeping and rebuild around the pipe sleeve. A joint that moves takes a flexible detail, not a rigid one.

  4. 4

    Refill, test, then sterilise

    We refill, read the level again to confirm the drop has stopped, then sterilise before the water is used, because the tank has been open with tools and hands inside it.

What tank leak repair includes

  • A technician inspecting with a flashlight

    A marked level test

    A reading before and after with everything shut, which establishes that the loss is the tank and not the plumbing.

  • A metal floor drain

    Draining and sediment removal

    Water and silt out of the base, so the floor and the walls can be seen as they really are.

  • A spray nozzle in close detail

    Pressure wash and dry back

    The weak layer and the dust come off, because a repair only holds on sound concrete.

  • A gloved hand applying bait into a joint

    Cracks opened and filled

    The crack is cut open and filled with a non-shrink mortar, and anything still weeping under water pressure is injected.

  • The visit report being written on a clipboard

    Refill and a recorded test

    We refill, read the level again and write the reading down, so the result is not a matter of opinion.

  • A clean kitchen counter after treatment

    Sterilised and back in service

    A wash and a sterilisation once the material has cured, and guidance on running the first fill off before the water is used.

What is different about Dhahban Sub-Municipality

Dhahban sub municipality is the northern coastal strip of Jeddah, running from the north bank of Sharm Obhur up to the old village of Dhahban and Salman Bay. Its districts are recently built, with owner occupied villas and apartments, beach resorts and chalets on the shore, and land subdivisions still being developed. Nearness to the sea keeps humidity high all year, irrigated lawns in villas, resorts and district parks hold water, Wadi Obhur and the vacant plots between buildings give rodents and reptiles shelter, and the old fishing village of Dhahban gives the far north a rural edge.

Questions about this district

Does a tank leak on the shoreline differ from inland leaks?

Yes, salt and atmospheric humidity are far more severe. We close the float valve and outlet and watch the level fall to pinpoint the leak source precisely.

Why do pipes leak faster on the northern beach?

Salt corrodes metals rapidly and very high atmospheric humidity causes corrosion from outside and inside simultaneously.

Is tank lining alone enough to stop saltwater leakage?

No. Lining goes on after cracks and joints are fixed. Without initial repair, lining is ineffective.

Do modern tanks leak less in this climate?

Even modern tanks need regular upkeep. Salt corrodes any metal quickly without proper protection.

How do we protect long pipe runs from joint leaks?

We seal joints tightly first, then insulate and protect pipes from salt and moisture.

Is full tank replacement necessary if the tank is old?

Not necessarily. If cracks are small and joints can be sealed, repair is cheaper and faster.

How much does tank leak repair in North Obhur cost?

It is set after the inspection, because the price follows the type of infestation, the size of the space, how far it has spread and the number of visits it needs. Send a photo and a description on WhatsApp and we will give you an estimate before we reach North Obhur.

Nearby districts we cover

Other services in North Obhur

Other services we provide to residents of North Obhur.

All services

Need tank leak repair in North Obhur? Tell us what you saw and we will tell you what it needs

We reach North Obhur at a time we agree, and you get the full cost before we start.

Call now +966 57 336 7012 WhatsApp