Fly control in Petromin, Jeddah

Targeted, not broadcast

Product goes into cracks and runways, never sprayed across open surfaces.
Told before we start

What we will use, where it goes, and what to cover or move before we arrive.
A follow-up visit

We return after the first treatment, because what survives it does not show on the day.
Homes and businesses

Apartments and villas, and kitchens and stores that need a record of each visit.

Why they keep coming back in Petromin

Site workers report that fly waves arrive from the refinery to the south in strong afternoon surges, and the new district's roads and drainage are still incomplete in places. The method is set out in full on what Fly control involves.

The first reason

The refinery to the south: a permanent industrial fly source

Jeddah Refinery is a massive constant fly source, and the wind carries it straight across the dividing street into the new district. The new neighbourhood cannot solve its fly problem alone because the primary source sits outside its boundaries.

The second reason

Vacant land and open building works everywhere

The new district still has vast vacant plots and open construction sites. Flies breed in standing water from irrigation and rainwater pooling in pits and trenches before the infrastructure is finished.

The third reason

Incomplete drainage network and water gathering in streets

New drainage networks are not finished everywhere, water collects in narrow streets and shared courtyards, a result of the rapid district growth. Flies love standing water even if it is clean.

Petromin on the map

Petromin sits about 2.5 km from Al Thaalibah and about 3 km from Al Quraiyat.

Open in Google Maps

Before treatment

Where the flies are actually coming from

A redevelopment district between Al Thaalibah, Ghulail and Al Quraiyat, open land awaiting building sits next to new modern apartment blocks, with Al Falah Road running past its eastern edge.

House fly

The common house fly here comes from the refinery and open construction, and finds a damp environment in incomplete streets and shared courtyards.

A metallic green fly on a wooden surface

Blow fly

The blow fly is found around construction sites, standing water and open waste.

Fermenting residue

Fermenting waste in shared yard bins provides continuous food for flies from the street and the refinery.

The bin base

The bin base in the shared courtyard stays damp from irrigation and rainwater collecting on the incomplete ground.

The film inside a drain

New pipes may hold standing water before they are fully connected, and moisture inside incomplete pipes provides ideal breeding ground.

A metal service door on a building exterior

The service door and its mesh

Service doors and window screens are essential here to limit fly entry from the refinery and the street.

How we work

1
Inspect and trace the source

We trace the flies back to their medium: waste and the bin area, floor traps, drain runs and any standing organic wetness, and we identify the species from its size, its flight and where it settles.
2
Treat the breeding medium

Washing and scouring bin bases and floor traps, and a foam that treats the film inside the pipe, because removing the medium is the only thing that stops production.
3
Treat the resting surfaces

A fly spends most of its time settled on ceilings, cables, the tops of walls and the sunlit wall outside the door, and that is where the residual and the bait go, not into the air.
4
Proofing and the follow-up

We close the ways in and sort out the screens and the doors, then come back on a date matching the emergence of the pupae that were already in the medium on the first visit.

What fly control includes

A source tracing inspection

The species, the breeding medium and the route in, established before anything is applied.
Drains and floor traps

Scouring the film stuck inside the pipe and treating it with foam, which is where drain flies come from and almost nowhere else.
Residual on the resting surfaces

Ceilings, cables, the tops of walls and the sunlit wall outside the door, kept off food preparation surfaces.
Fly bait in protected positions

An attractant bait set at bin areas and service entrances, out of reach of children and pets and away from food.
Aftercare instructions

Ventilation, what to cover, and what needs a screen, an air curtain or a different waste routine.
A scheduled follow-up

A set date matching the emergence of the pupae, and re-treatment of any source still producing.

Landmarks of Petromin

Fly control in Petromin focuses on the new district from Al Nujoom Roundabout to the east where new housing begins, extending west to Al Falah Road, always mindful of afternoon fly waves arriving from Jeddah Refinery.

Jeddah Refinery
Al Falah Road
Al Nujoom Roundabout

Questions about this district

Is fly infestation from Jeddah Refinery the main problem in Petromin?

Yes. The refinery is a steady primary source every single day, and wind carries flies straight across the dividing road. Treating only the new district will not solve the whole problem, but protecting your flat and villa is necessary.

Do vacant plots and open construction work increase the fly problem?

Yes, very much. Ongoing building leaves standing water, waste and damp conditions that attract flies, and vacant land provides a breeding ground before it is built on.

How often must a district like Petromin be treated per year?

Petromin may need repeated treatments because the refinery source is constant and building work creates new fly sources, so seasonal treatment alone may not be enough.

Is treating my new flat alone enough or must we treat the whole district?

Treating your flat alone protects you, but if the district lacks complete drainage and the streets are still being finished, flies remain a common problem. Coordinated treatment is more effective.

Does incomplete drainage in a new district like Petromin create a worse fly problem?

Yes, very much. Incomplete drainage leaves standing water in streets and shared yards, and standing water is a fly hatchery. Completing the drainage network reduces the problem.

Will screens and proper sealing stop flies coming from the refinery?

Not completely, but they greatly reduce entry. Good screens and closed doors are essential when the refinery is a constant source.

How much does fly control in Petromin cost?

It is set after the inspection, because the price follows the type of infestation, the size of the space, how far it has spread and the number of visits it needs. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Petromin.