A technician checking the inside wall of a concrete water tank with a torch
What our clients rate us

Tank leak repair in Al Judairiyah Al Jadid Makkah

Al Judairiyah Al Jadid is a Crown Prince scheme close to Al Ukayshiyah, with Al Judairiyah Al Jadid Street as its main spine. New villas and residential plots line the street, Jabal Al Raqid rises within the district and Wadi Uranah crosses it. Tanks here face challenges from altitude and pressure because the district sits at elevation on rocky soil.

  • Potable-rated materials

    Linings and disinfectants cleared for drinking water tanks, not general-purpose products.

  • You get the downtime first

    How many hours the tank is out of service, told before we start rather than after we finish.

  • A first-draw flush

    We run the first draw off after refilling, and the tank is not handed back until the water runs clear.

  • Ground and roof tanks

    Villas, apartment blocks and premises that need a written record of each visit.

Why the job is different in Al Judairiyah Al Jadid

The soil here is rocky and strong but the district sits at high altitude and tanks receive high supply pressure from the city main line. The method is set out in full on what Tank leak repair involves.

The first reason

Elevation of the district raises water pressure on tanks

Al Judairiyah Al Jadid sits at high elevation in south Jeddah. City mains deliver water at high pressure and tanks receive steady stress. Valves and connectors tire quickly from high pressure and metals corrode fast.

The second reason

Rocky soil but insufficient foundation depth

The soil is rocky and strong but bedrock lies close to the surface. Foundations were not dug deep and the tank sits on a shallow base. Seasonal movement and deflection cause small cracks.

The third reason

Wadi Uranah and seasonal groundwater reduce foundation stability

Wadi Uranah passes through the district and seasonal groundwater rises. Shallow foundations are affected by the wadi's moisture and the tank shifts slightly with each season.

Al Judairiyah Al Jadid on the map

Al Judairiyah Al Jadid sits about 2.5 km from Al Hajlah Al Jadid and about 3 km from Al Souq Al Saghir Al Jadid.

Open in Google Maps
Before treatment

Where the water leaves decides how it is repaired

A new Crown Prince development district near Al Ukayshiyah with villas and residential plots along the axis of Al Judairiyah Al Jadid Street, between Al Souq Al Saghir Al Jadid and Al Hajlah Al Jadid. Wadi Uranah crosses the district, Jabal Al Raqid rises within its boundaries and the southern Haram boundary marker stands at its edge.

A concrete wall marked with damp and a white salt bloom

Damp and salt on the outside wall

Al Judairiyah Al Jadid tank leaks originate at the float valve because high pressure fatigues cheap valve seats.

A fine crack running across a concrete surface

The kind of crack

Inlet pipes may leak at the connector if pressure is severe and the tank is old.

The corner where a concrete floor meets a wall

The wall to floor junction

Overflow openings may leak continuously if the float valve raises the water level too high under elevated pressure.

Water pipes passing through a concrete wall

Pipe entries

Natural moisture is high in winter when Wadi Uranah's water table rises near the foundations.

A blistered and peeling layer on a concrete surface

The condition of the old lining

Tank location is usually roof-mounted or in the external cavity on a shallow rocky base.

A white plastic water tank standing outside

What the tank is made of

Water leaks appear relatively quickly because high pressure reveals weakness in valves and connectors.

How we work

  1. 1

    Inspect and locate the leak

    We close the float valve and the outlet, mark the water level and watch it fall, then check the fittings and the wall beside it. That separates a tank leak from a pipe leak or a float valve that never shuts.

  2. 2

    Drain, clean and dry

    We empty the tank, lift the sediment off the base, wash back to sound concrete and let the surface dry. No repair holds on a damp or dusty face.

  3. 3

    Repair the cracks and the entries

    We cut the crack open, fill it with a non-shrink mortar, inject anything still weeping and rebuild around the pipe sleeve. A joint that moves takes a flexible detail, not a rigid one.

  4. 4

    Refill, test, then sterilise

    We refill, read the level again to confirm the drop has stopped, then sterilise before the water is used, because the tank has been open with tools and hands inside it.

What tank leak repair includes

  • A technician inspecting with a flashlight

    A marked level test

    A reading before and after with everything shut, which establishes that the loss is the tank and not the plumbing.

  • A metal floor drain

    Draining and sediment removal

    Water and silt out of the base, so the floor and the walls can be seen as they really are.

  • A spray nozzle in close detail

    Pressure wash and dry back

    The weak layer and the dust come off, because a repair only holds on sound concrete.

  • A gloved hand applying bait into a joint

    Cracks opened and filled

    The crack is cut open and filled with a non-shrink mortar, and anything still weeping under water pressure is injected.

  • The visit report being written on a clipboard

    Refill and a recorded test

    We refill, read the level again and write the reading down, so the result is not a matter of opinion.

  • A clean kitchen counter after treatment

    Sterilised and back in service

    A wash and a sterilisation once the material has cured, and guidance on running the first fill off before the water is used.

The character of Al Judairiyah Al Jadid

New development: ongoing construction and vacant plots between the homes

New villas at high elevation mean high sustained water pressure on tanks. Repair strategy focuses on protecting valve seats and connectors from excess pressure and may require fitting a pressure regulator before the tank inlet.

Questions about this district

Why do tanks in Al Judairiyah Al Jadid leak specifically from the float valve?

High pressure fatigues the valve seat quickly. Cheap valves cannot withstand 4 or 5 bar sustained pressure for long.

Does high pressure crack the tank itself?

Sustained high pressure may cause small cracks in the tank corners. Modern tanks are designed for normal pressure, not sustained high pressure.

Do we need a pressure regulator?

Yes. If pressure exceeds safe limits we fit a regulator at the tank inlet. This protects the tank and fittings from excess pressure.

Does rocky soil prevent moisture from beneath the tank?

Rock prevents moisture from below but Wadi Uranah raises the water table from the side. In winter groundwater rises around the foundation.

Is pressure-crack damage different from settling-crack damage?

Yes. Pressure cracks form at corners and are small and straight. Settling cracks are random and deeper.

Is fixing the valve and fitting a regulator enough?

If there is no crack in the tank itself, yes. But if pressure has damaged the tank body, we must drain and rebuild the interior.

How much does tank leak repair in Al Judairiyah Al Jadid cost?

It is set after the inspection, because the price follows the type of infestation, the size of the space, how far it has spread and the number of visits it needs. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Al Judairiyah Al Jadid.

Other services in Al Judairiyah Al Jadid

Other services we provide to residents of Al Judairiyah Al Jadid.

All services

Need tank leak repair in Al Judairiyah Al Jadid? Tell us what you saw and we will tell you what it needs

We reach Al Judairiyah Al Jadid at a time we agree, and you get the full cost before we start.

Call now +966 57 336 7012 WhatsApp