Termite control in Bani Malik, Jeddah

Targeted, not broadcast

Product goes into cracks and runways, never sprayed across open surfaces.
Told before we start

What we will use, where it goes, and what to cover or move before we arrive.
A follow-up visit

We return after the first treatment, because what survives it does not show on the day.
Homes and businesses

Apartments and villas, and kitchens and stores that need a record of each visit.

Why they keep coming back in Bani Malik

Workshops and stores were built quickly on small footings with thin concrete, and stacked timber means easy entry points for termites if moisture hides under the slab. The method is set out in full on how we approach Termite control.

The first reason

Dry surface soil with porous old concrete

Soil is dry on top, but thin old concrete under workshops traps moisture below. This creates damp pockets under a dry seeming floor, where termites live hidden from sight.

The second reason

Stacked and sectioned wood in stores

Car workshops and warehouses hold timber pieces, axles and wooden trim in high concentration. Termites are drawn to this dense cellulose source, and storage rarely follows moisture control standards.

The third reason

Shallow footings under heavy loads

Workshops and stores were built fast on very shallow footings. Concrete is thin and cracked, and heavy stockpiled weight presses down and widens the voids where termites breach.

Bani Malik on the map

Bani Malik sits about 2 km from Al Naseem and about 2 km from Al Wurud.

Open in Google Maps

Before treatment

The evidence that decides the treatment

An old district between King Fahd Road and Haramain Road, popular quarters with car workshops and the Bani Malik market, ageing buildings and wooden stores on dry surface soil.

Mud tubes

Mud tubes in Bani Malik can run directly beneath concrete floors, trapped out of sight, and may not rise high on walls until months have passed.

Discarded transparent wings on a window ledge

Shed wings

Shed wings appear more often in stacked wood than on surfaces, because termites develop close to their concentrated food source in the timber.

A damaged timber frame showing internal galleries

Hollow timber

Hollow timber in workshops and warehouses advances rapidly because wood is abundant and moisture is trapped beneath it, and damage may stay hidden until a structural piece fails.

A dark damp patch below a pipe at a wall base

The water source

The water source is trapped under old concrete and thick floors, and dry surface soil does not mean water is absent below.

Cardboard boxes and timber stacked on a store floor

Cellulose on the floor

Cellulose on the floor is abundant in car workshops: wooden roof posts, floor boards in attached offices, and all stored timber lying directly on concrete.

A concrete joint and a pipe passing through a floor slab

Joints and pipe entries

Joints and pipe entries leak in these old buildings, and heavy stockpile weight means joints widen gradually and are only repaired after collapse begins.

How we work

1
Inspect and trace

We sound the timber and the skirting, take moisture readings, and follow the tubes to the point where they leave the soil. We also settle the species, because one that lives inside dry wood is not treated like one that lives in the ground.
2
Treat the soil around the building

A narrow trench at the footing and injection at regular spacing, so the treated band runs continuous with no gap to walk around.
3
Drill the joints, inject the timber

Small holes at spacing along the slab joints, the wall bases and the pipe entries, direct injection into the galleries inside the affected timber, then the holes are closed and made good.
4
Bait stations and monitoring

Stations in the soil carrying a slow-acting material the workers pass through the colony by mouth-to-mouth feeding, and we come back to read them, because an empty tube on a wall proves nothing on its own.

What termite control includes

A traced, recorded inspection

Sounding, moisture readings, tubes traced back to the soil, and the species settled before anything is applied.
A treated band at the perimeter

Trenching and injection at the footing, spaced so the band is continuous rather than a set of patches.
Joints and service penetrations

Slab joints, pipe entries and floor drains, which are the ways up through the concrete.
Bait stations in the soil

A slow material carried back through the colony by feeding exchange, rather than stopping the workers at the wall.
Aftercare instructions

What not to dig or water near the treated band, what to keep off the walls, and the ventilation time we set for your case.
Scheduled monitoring visits

Reading the stations, sounding the same timber again, and treating any new activity.

The character of Bani Malik

Commercial area: offices, showrooms and small stores

A commercial area means priority is the timber and inventory, and termites may be remote from the footing, living in the wood itself. Treatment must target footings, timber and warehouses together, not just the footing alone.

Questions about this district

Does dry soil mean the infestation risk is lower in Bani Malik?

Surface dryness is deceptive. Moisture can be trapped under old concrete, and everything a termite colony needs is present. Inspection under floors is essential because apparent dryness does not mean safety.

Does the timber stored in car workshops attract termites more than other areas?

Yes, high cellulose concentration and often damp conditions from water use create strong attraction. An infested workshop next door means higher risk to your building.

Do warehouses need floor treatment as well as footing work?

Both are essential. Footings first because they are the main entry route, then the floor and around stacked wood. Termites may already be above ground in the stored timber, so interior inspection is necessary.

Is newly built property in the area better protected than old buildings?

New building may have deeper footings, but the environment itself favours wood. If it is a warehouse or workshop, risk is present, and monitoring is important from the start.

What determines the cost of treating a large warehouse or car workshop?

Cost depends on floor area and the depth of treatment needed. The site must be inspected first to set the plan and cost, and no price can be estimated without seeing the building and floors.

Can we treat a workshop while it is still running or must it close?

Work can run alongside treatment, though you may need to reduce activity in certain areas briefly. We use products safe for workers, and advance coordination ensures least disruption.

How much does termite control in Bani Malik cost?

It is set after the inspection, because the price follows the type of infestation, the size of the space, how far it has spread and the number of visits it needs. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Bani Malik.