Water tank sealing in Umm Hablain Jeddah
Umm Hablain is a new-development district on Jeddah's north-eastern fringe, split into eastern and western halves with Wadi Umm Hablain and its dam running through it. The quarter consists of recent subdivisions with new apartment buildings and warehouses with heavy lorry traffic. Tanks here are relatively new but vibration from lorry movement and desert dust accelerate lining failure.
-
Potable-rated materials
Linings and disinfectants cleared for drinking water tanks, not general-purpose products.
-
You get the downtime first
How many hours the tank is out of service, told before we start rather than after we finish.
-
A first-draw flush
We run the first draw off after refilling, and the tank is not handed back until the water runs clear.
-
Ground and roof tanks
Villas, apartment blocks and premises that need a written record of each visit.
Why the job is different in Umm Hablain
Buildings are new but tanks face high stress from elevated water consumption and constant vibration from heavy lorry movement and desert dust ingress. The method is set out in full on what Water tank sealing involves.
Worker housing and new apartment blocks
Apartment blocks leased to construction workers and migrant labourers have rooftop tanks under severe pressure. Water consumption is very high and tanks run at maximum capacity throughout the day.
Warehouses and industrial activity
Large warehouses and heavy workshops around them cause vibrations from lorries and machinery. These vibrations transmit to tanks and accelerate concrete lining cracks.
Desert environment, dust and heat
The district lies on the desert fringe and fine dust penetrates tank cracks. Intense solar heat and severe nightly cooling cause rapid daily expansion and contraction.
Umm Hablain on the map
Umm Hablain sits about 4.5 km from Al Kawthar and about 6.5 km from Al Rayyan.
Open in Google MapsWhat we read before any material is opened
A new-development quarter on Jeddah's north-eastern fringe beyond Al Rayyan and Al Kawthar, divided into two halves around Wadi Umm Hablain, containing new apartment buildings, worker housing and warehouses with heavy vehicle movement.
Cracking in the wall
Lining inspection reveals fine cracks and crazing from vibration and sustained high pressure on the tank.
The floor to wall joint
Base and wall inspection checks for collapse or warping from repeated vibrations of heavy lorries.
The condition of the old lining
Pipe entry and joint inspection checks for dust and rust accumulation from the harsh desert environment.
Sediment and scale
Gap and crack inspection detects pathways through which fine dust and sand penetrate the lining.
The pipe entries
Inspection of tank mounting to the roof structure checks thermal insulation, as rapid heat gain causes fast expansion.
The hatch and the vent
Water quality inspection assesses mineral deposits and suspended dust that accelerate lining wear.
How we work
-
1
Inspect with the tank empty
We drain it and read the surface dry: whether the water leaves through a crack, a joint or a pipe collar, and what the outer face of the wall and the ceiling below are telling us. A level test with the valves closed separates a leaking tank from leaking pipework.
-
2
Clean and prepare the substrate
Sediment out, a high pressure wash, the loose old lining and the weak surface layer of the concrete taken back, then dried. The material grips sound substrate and nothing else.
-
3
Make the cracks and joints good
Cracks are chased out and filled with a repair mortar, a cove is formed where the floor meets the wall, and every pipe collar is treated on its own.
-
4
Lining, fill test, sterilisation
Successive coats, each run across the one beneath it, on the face the water touches. Then a full cure, a fill with the level watched, and sterilisation with the first fill run to waste before the tank returns to use.
What water tank sealing includes
-
Finding where the water leaves
Carried out drained and dry: cracks, joints, pipe collars and the outer face of the wall.
-
Draining and sediment removal
The last of the water and the settled layer on the floor come out, because a lining does not stick over sediment.
-
Cracks and joints made good
The crack opened and filled, a cove formed at the floor to wall junction, and each pipe entry worked separately.
-
Lining coats on the water face
More than one coat, each crossing the one below, in material made for drinking water tanks rather than roof waterproofing.
-
Curing, fill test and sterilisation
The material is left to cure, the tank is filled and the level watched, then sterilised and the first fill run to waste. How long the cure takes follows the material and the weather, and we tell you before the date so you can plan around the supply.
-
A follow-up level check
We come back once it is in service to read the level and check the outer face, because any remaining loss shows up then rather than on the day of the work.
The character of Umm Hablain
New development: ongoing construction and vacant plots between the homes
A new-development zone means tanks are modern but under severe stress. Warehouses and heavy activity cause continuous vibration that accelerates deterioration. Treatment focuses on strengthening the lining to withstand pressure, vibration and harsh desert conditions.
Questions about this district
Why do tanks in Umm Hablain need resealing faster than other quarters?
Vibration from lorries and machinery accelerates lining cracking. Dust, heat and low humidity damage concrete rapidly.
Can a new tank leak within a year of construction?
It can if the original concrete quality was poor or if the tank operates under high stress from heavy consumption.
What is the effect of lorry vibration on a water tank?
Vibration causes crazing in the lining and fine cracks that widen over time. Seepage starts small then grows quickly.
Do warehouses need different tank sealing than residential buildings?
The requirement may differ based on water consumption and pressure, but the principle is the same: repair and rebuild the lining.
Does high-pressure washing remove fine cracks?
No, high-pressure washing may enlarge existing cracks. Cracks need permanent repair through resealing.
How often should tanks be inspected in an active industrial zone?
Inspection every six months is advisable because pressure, vibration and dust accelerate deterioration.
How much does water tank sealing in Umm Hablain cost?
It is set after the inspection, because the price follows the type of infestation, the size of the space, how far it has spread and the number of visits it needs. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Umm Hablain.
Nearby districts we cover
Other services in Umm Hablain
Other services we provide to residents of Umm Hablain.
-
Water tanks
Water tank cleaning
-
Water tanks
Water tank sterilization
-
Water tanks
Tank leak repair
-
Residential
Cockroach control
Need water tank sealing in Umm Hablain? Tell us what you saw and we will tell you what it needs
We reach Umm Hablain at a time we agree, and you get the full cost before we start.