Fly control in Al Khansa Makkah
Al Khansa is a crowded district running between Al Hajj and Al Abtah Streets, where old popular houses stand alongside newer apartment blocks and the main street is continuously being widened by property demolition. Flies breed underneath raised houses in wet gaps, in cracks of old masonry, and in heaps of demolition waste gathering in alley corners during the ongoing construction and clearance work.
-
Targeted, not broadcast
Product goes into cracks and runways, never sprayed across open surfaces.
-
Told before we start
What we will use, where it goes, and what to cover or move before we arrive.
-
A follow-up visit
We return after the first treatment, because what survives it does not show on the day.
-
Homes and businesses
Apartments and villas, and kitchens and stores that need a record of each visit.
Why they keep coming back in Al Khansa
Flies in demolition and building zones are more numerous and more resistant, finding food in waste heaps and shelter in ruins and new voids. The method is set out in full on our Fly control service.
Property demolition and ongoing construction
Property seizures to widen Al Hajj Street leave rubble, gaps and accumulating building waste. This waste feeds flies perfectly and houses them. Treatment kills present flies but fresh waste brings new generations continuously.
Gaps below raised houses and newly built blocks
Old houses in Al Khansa sit slightly raised, leaving gaps below them. These gaps are damp, dark and hold street debris. Flies hide there, breed, and escape surface treatment completely.
Very high population density and waste buildup
The quarter has extreme population density with too few bins. Demolition adds debris and chaos. Rubbish heaps in tight lanes and around half-demolished buildings make daily cleaning nearly impossible.
Al Khansa on the map
Al Khansa sits about 1 km from Rai Adhakhir and about 1.5 km from Al Maabdah.
Open in Google MapsWhere the flies are actually coming from
The district links Al Hajj Street with Al Maabdah Street towards the Grand Mosque, bounded by Rai Adhakhir to the north and Al Maabdah and Al Jumayzah to the south. Active demolition, rebuilding and land clearance are part of daily life, and waste, dust and rubble are everywhere.
House fly
The house fly in Al Khansa finds millions of hiding places in cracks and voids, and every demolition and build cycle creates fresh shelter.
Blow fly
The blow fly is drawn to organic waste accumulating in demolition sites and building zones. Existing moisture speeds its development.
Fermenting residue
Food remnants in high-density housing, organic matter embedded in rubble and voids, ferment rapidly and emit odours that attract flies from far away.
The bin base
Shared bin bases in street and alley are constantly overflowing. Scattered rubbish around the bins provides extra food and breeding sites.
The film inside a drain
The shared drain beneath a high density street leaks constantly. Ground around half-demolished buildings becomes very wet.
The service door and its mesh
Open doors and windows in old houses and new construction sites provide easy fly entry. Gaps around pipes stay open throughout building work.
How we work
-
1
Inspect and trace the source
We trace the flies back to their medium: waste and the bin area, floor traps, drain runs and any standing organic wetness, and we identify the species from its size, its flight and where it settles.
-
2
Treat the breeding medium
Washing and scouring bin bases and floor traps, and a foam that treats the film inside the pipe, because removing the medium is the only thing that stops production.
-
3
Treat the resting surfaces
A fly spends most of its time settled on ceilings, cables, the tops of walls and the sunlit wall outside the door, and that is where the residual and the bait go, not into the air.
-
4
Proofing and the follow-up
We close the ways in and sort out the screens and the doors, then come back on a date matching the emergence of the pupae that were already in the medium on the first visit.
What fly control includes
-
A source tracing inspection
The species, the breeding medium and the route in, established before anything is applied.
-
Drains and floor traps
Scouring the film stuck inside the pipe and treating it with foam, which is where drain flies come from and almost nowhere else.
-
Residual on the resting surfaces
Ceilings, cables, the tops of walls and the sunlit wall outside the door, kept off food preparation surfaces.
-
Fly bait in protected positions
An attractant bait set at bin areas and service entrances, out of reach of children and pets and away from food.
-
Aftercare instructions
Ventilation, what to cover, and what needs a screen, an air curtain or a different waste routine.
-
A scheduled follow-up
A set date matching the emergence of the pupae, and re-treatment of any source still producing.
Landmarks of Al Khansa
Al Khansa lies between Al Hajj Street and Al Maabdah Street, connecting directly from both main roads towards the Grand Mosque. Treatment teams reach it from either main street and work coordinated with foot traffic on both.
- Al Hajj Street
- Al Abtah Street
- Al Adl Cemetery
- Al Maabdah Street
- Rai Al Hadadah
Questions about this district
Is active building the main cause of flies in Al Khansa?
Building and demolition worsen the problem significantly but are not the sole cause. Cracks in old houses, accumulated waste and overfilled bins are all sources. But property demolition greatly magnifies the issue temporarily.
Will flies disappear after building finishes?
Fly numbers will drop when work ends, but will not disappear entirely. The district itself suits them because of density, cracks and moisture. Post-construction stability will help, but regular treatment will remain necessary.
Can vacant plots and projects be treated?
Yes, vacant plots and building projects can be treated. But fresh waste added daily may recontaminate the site. Regular treatment during construction provides temporary protection until work ends.
Do new residents in new buildings make fly problems worse?
New residents bring new waste and different consumption patterns. But new buildings may be better sealed than old ones, which can ease the problem slightly if well designed.
Is one treatment enough for a new zone in Al Khansa?
No. One treatment fails during active construction. Waste accumulates constantly and new flies emerge fast. Repeat treatment every two or three weeks is essential to manage the pressure.
How does treatment reach under raised houses and building bases?
We use injection equipment and flexible pipes to deliver treatment under foundations and deep gaps. We may temporarily move furniture to reach under houses. This takes coordination with residents but reaches the real breeding sites.
How much does fly control in Al Khansa cost?
It is set after the inspection, because the price follows the type of infestation, the size of the space, how far it has spread and the number of visits it needs. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Al Khansa.
Nearby districts we cover
Other services in Al Khansa
Other services we provide to residents of Al Khansa.
-
Residential
Cockroach control
-
Residential
Bed bug control
-
Residential
Termite control
-
Residential
Rodents and mice
-
Residential
Mosquito control
-
Residential
Ant control
-
Residential
Gecko control
-
Residential
Scorpion control
-
Residential
Snake control
-
Residential
Flea control
-
Residential
Bird and pigeon control
-
Residential
Preventive treatment
-
Residential
Disinfection
-
Commercial
Annual contracts
-
Commercial
Restaurants and cafes
-
Commercial
Hotels and apartments
-
Commercial
Warehouses and factories
-
Commercial
Schools and nurseries
-
Commercial
Retail and malls
-
Commercial
Rest houses and farms
-
Commercial
Fumigation
-
Water tanks
Water tank cleaning
-
Water tanks
Water tank sterilization
-
Water tanks
Water tank sealing
-
Water tanks
Tank leak repair
Need fly control in Al Khansa? Tell us what you saw and we will tell you what it needs
We reach Al Khansa at a time we agree, and you get the full cost before we start.