Fly control in Rai Adhakhir, Makkah

Targeted, not broadcast

Product goes into cracks and runways, never sprayed across open surfaces.
Told before we start

What we will use, where it goes, and what to cover or move before we arrive.
A follow-up visit

We return after the first treatment, because what survives it does not show on the day.
Homes and businesses

Apartments and villas, and kitchens and stores that need a record of each visit.

Why they keep coming back in Rai Adhakhir

Deep shared entrances in the blocks trap flies and restrict airflow, allowing them to settle longer than in open spaces before moving up to the flats. The method is set out in full on our Fly control service.

The first reason

Shared waste bins collect food scraps from dozens of flats

In Rai Adhakhir, one waste bin serves many residents, collecting leftover food and vegetable scraps from each flat. Flies breed in the bin before spreading into the building. Treatment of the bin itself and the surrounding area is the critical first step.

The second reason

Narrow shared entrances slow air movement and trap odour

The communal stairwell and narrow passageways trap food odours, drawing and holding flies there before they move up the building. Treatment targets these choke points first, before the flies climb to the flats.

The third reason

Higher flats need repeated treatment from below to prevent return

Flats on upper storeys are hit by flies rising from below and entering through windows. Effective treatment starts at the waste source and follows the flies upward through the building.

Rai Adhakhir on the map

Rai Adhakhir sits about 1 km from Al Khansa and about 1.5 km from Al Jumayzah.

Open in Google Maps

Before treatment

Where the flies are actually coming from

The district rises gradually toward Al Khansa on mountain-facing slopes, with apartments tightly packed on the hillside and shared rubbish collection areas serving many residents at once.

House fly

House flies in Rai Adhakhir concentrate on shared waste bins and narrow entrances where they settle before climbing to the flats.

A metallic green fly on a wooden surface

Blow fly

Blow flies are rare in the flats themselves but appear around the bins, especially if they hold meat or poultry waste.

Fermenting residue

Food scraps piled in shared bins are the main breeding environment and treatment starts there.

The bin base

The bin base holds moisture and food residue and is the critical point we target in every treatment.

The film inside a drain

Drains in shared entrances and narrow passageways carry food scraps and moisture where flies breed.

A metal service door on a building exterior

The service door and its mesh

Service door seals on bins are often poor or missing, allowing flies easy entry and exit from the bin.

How we work

1
Inspect and trace the source

We trace the flies back to their medium: waste and the bin area, floor traps, drain runs and any standing organic wetness, and we identify the species from its size, its flight and where it settles.
2
Treat the breeding medium

Washing and scouring bin bases and floor traps, and a foam that treats the film inside the pipe, because removing the medium is the only thing that stops production.
3
Treat the resting surfaces

A fly spends most of its time settled on ceilings, cables, the tops of walls and the sunlit wall outside the door, and that is where the residual and the bait go, not into the air.
4
Proofing and the follow-up

We close the ways in and sort out the screens and the doors, then come back on a date matching the emergence of the pupae that were already in the medium on the first visit.

What fly control includes

A source tracing inspection

The species, the breeding medium and the route in, established before anything is applied.
Drains and floor traps

Scouring the film stuck inside the pipe and treating it with foam, which is where drain flies come from and almost nowhere else.
Residual on the resting surfaces

Ceilings, cables, the tops of walls and the sunlit wall outside the door, kept off food preparation surfaces.
Fly bait in protected positions

An attractant bait set at bin areas and service entrances, out of reach of children and pets and away from food.
Aftercare instructions

Ventilation, what to cover, and what needs a screen, an air curtain or a different waste routine.
A scheduled follow-up

A set date matching the emergence of the pupae, and re-treatment of any source still producing.

The character of Rai Adhakhir

Apartment district: residential blocks, repeated floors and shared entrances

Stacked flats mean one breeding bin supplies flies to dozens of households at once. Effective treatment cuts the pathway at source before the flies spread vertically through the building.

Questions about this district

Does the fly infestation come from one flat or from all the residents?

In apartment blocks, waste collects in a shared bin and flies breed there before spreading to every flat. Treating the bin and shared entrance stops the spread at the source.

Why do flies come back so quickly after we spray the flat?

Because the breeding source in the bin or entrance is still producing fresh generations. Without treating the shared areas, spraying inside the flat is only a temporary measure.

Do we need to treat every flat in the building or just the ones with flies?

Effective treatment focuses on the bin, the shared entrance and passageways, then the flats reporting the problem. Not every flat needs treatment, only the sources and the pathways.

Does moisture in the shared passageways help the flies survive longer?

Yes. Narrow, damp and dark passageways provide shelter for flies. Treatment covers these areas especially around bins and drains.

How many visits does a single building need before the flies are gone?

Usually two or three visits at close intervals: the first targets the bin and entrance, the second picks up any remaining breeding, and the third confirms they have not returned.

Is treating the entrance enough or must we go into every flat?

Treating the entrance and bin stops the spread at source. Entering flats comes next only if breeding is confirmed inside them, not as a first step.

How much does fly control in Rai Adhakhir cost?

It is set after the inspection, because the price follows the type of infestation, the size of the space, how far it has spread and the number of visits it needs. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Rai Adhakhir.