A pest control technician checking a bin area and an outside floor drain
What our clients rate us

Fly control in Al Wurud Jeddah

Al Wurud is a mixed district that grew on the site of the old airport, with shops, apartment blocks and villas clustered closely together. Flies spread easily between units because the gaps are tight, drainage is shared and the water-retaining clay soil from the former airport creates seasonal breeding sources in the open spaces.

  • Targeted, not broadcast

    Product goes into cracks and runways, never sprayed across open surfaces.

  • Told before we start

    What we will use, where it goes, and what to cover or move before we arrive.

  • A follow-up visit

    We return after the first treatment, because what survives it does not show on the day.

  • Homes and businesses

    Apartments and villas, and kitchens and stores that need a record of each visit.

Why they keep coming back in Al Wurud

Mid-storey flats in the newer blocks of Al Wurud report worse fly problems than villas in the district, because each flat adjoins others across thin walls and through shared sewage, multiplying the vectors of transfer. The method is set out in full on our Fly control service.

The first reason

The district sits on old damp ground

Al Wurud was built on the footprint of the old airport, and the clay soil retains moisture and winter flooding. Open spaces between buildings pool water after rain and become strong breeding sites in certain seasons, creating a seasonal source of flies that enters the buildings from outside.

The second reason

Tight gaps between residential units

Buildings in Al Wurud are packed tightly and the spaces between them are narrow, damp and collect food scraps and standing water. Flies move between flats through these small openings with ease, transferring from one neighbour to the next without needing to leave the building envelope.

The third reason

Ageing shared drainage systems

The sewage in Al Wurud is old, shared among many units and choked with grease, silt and organic matter. This environment accelerates fly breeding dramatically, and each flat receives waves of emerging flies from the common pipes regardless of its own cleanliness.

Al Wurud on the map

Al Wurud sits about 2 km from Al Sharafiyah and about 2 km from Bani Malik.

Open in Google Maps
Before treatment

Where the flies are actually coming from

Between King Fahd and Prince Majid Roads, Al Wurud is densely built with a mix of shops, apartment buildings and villas. The clay soil inherited from the old airport holds water after rain, creating pools in the low spots between structures.

A house fly on a window pane

House fly

House flies in Al Wurud spread rapidly between adjoining flats through drainage openings and small gaps, especially in the older buildings where shared pipes and close proximity accelerate movement.

A metallic green fly on a wooden surface

Blow fly

Blow flies appear seasonally in Al Wurud in the damp open spaces around the district, breeding in exposed organic waste and entering nearby buildings during peak periods.

Over-ripe fruit in a wooden bowl

Fermenting residue

Fermenting residue accumulates quickly in the shared drainage between units because the clay soil retains water and slows the flow, creating ideal conditions for larval development.

Waste bins standing on concrete

The bin base

The bin base serving multiple units in Al Wurud collects leachate and scraps from all occupants and becomes a shared incubator for flies.

A floor drain grate set in tiling

The film inside a drain

The internal drain film in Al Wurud's older buildings is narrow and shared, accumulating layers of fly larvae and pupae faster than in modern developments, turning the common pipes into a continuous source.

A metal service door on a building exterior

The service door and its mesh

Service doors and their mesh screens in Al Wurud's apartment blocks are often loose-fitting or torn, allowing steady fly entry into the common passages and between units.

How we work

  1. 1

    Inspect and trace the source

    We trace the flies back to their medium: waste and the bin area, floor traps, drain runs and any standing organic wetness, and we identify the species from its size, its flight and where it settles.

  2. 2

    Treat the breeding medium

    Washing and scouring bin bases and floor traps, and a foam that treats the film inside the pipe, because removing the medium is the only thing that stops production.

  3. 3

    Treat the resting surfaces

    A fly spends most of its time settled on ceilings, cables, the tops of walls and the sunlit wall outside the door, and that is where the residual and the bait go, not into the air.

  4. 4

    Proofing and the follow-up

    We close the ways in and sort out the screens and the doors, then come back on a date matching the emergence of the pupae that were already in the medium on the first visit.

What fly control includes

  • A technician inspecting with a flashlight

    A source tracing inspection

    The species, the breeding medium and the route in, established before anything is applied.

  • A metal floor drain

    Drains and floor traps

    Scouring the film stuck inside the pipe and treating it with foam, which is where drain flies come from and almost nowhere else.

  • A spray nozzle in close detail

    Residual on the resting surfaces

    Ceilings, cables, the tops of walls and the sunlit wall outside the door, kept off food preparation surfaces.

  • A gloved hand applying bait into a joint

    Fly bait in protected positions

    An attractant bait set at bin areas and service entrances, out of reach of children and pets and away from food.

  • A clean kitchen counter after treatment

    Aftercare instructions

    Ventilation, what to cover, and what needs a screen, an air curtain or a different waste routine.

  • The visit report being written on a clipboard

    A scheduled follow-up

    A set date matching the emergence of the pupae, and re-treatment of any source still producing.

The character of Al Wurud

Mixed district: shops at street level with homes above them

In Al Wurud's mixed buildings, flies transfer easily between units because drainage and gaps are shared across many flats. Treatment targets the shared sewage lines and gaps between units first, then addresses the damp ground around the building to prevent new flies entering from outside.

Questions about this district

Is the damp ground from the old airport in Al Wurud the main source of flies?

The damp ground provides breeding sites in the open spaces and low points outside, but the primary source of flies in the flat is rubbish and internal drainage. Moisture helps flies survive and breed once present, but does not create them on its own.

Our flat is far from the shops but flies are very heavy here. Why is that?

In Al Wurud, flies transfer between flats through shared sewage and tight gaps, even if the flat is distant from commercial shops. The damp ground surrounding the building may also act as an external source, adding to the internal transfer from neighbouring units.

Do the flats adjoining ours suffer more or less from flies than ours does?

Adjoining flats are the infection source and transfer vectors because they share the sewage and gaps. If a neighbouring flat harbours a breeding site, new waves of flies will continuously move into your flat through the common drainage.

If we treat the gaps between our flat and the neighbours', will that reduce transfer?

Treating the gaps kills the flies present, but does not stop the source from continuing to spread through the shared pipes unless the originating flat and the common drainage are treated as well.

Does winter in Al Wurud reduce flies because of the cold, or does the damp keep them active?

Winter reduces fly activity outside the flat, but inside the warm and damp spaces of the home they continue to breed. The moisture from the pipes and the clay soil keep them viable even through the cold season.

If we deep-clean the flat weekly, is that enough to stop flies transferring from the neighbours?

Deep cleaning reduces attraction but does not block transfer from neighbouring flats through the common drainage and gaps. Treating the flat and the shared sewage is necessary alongside cleaning to interrupt the cycle.

How much does fly control in Al Wurud cost?

It is set after the inspection, because the price follows the type of infestation, the size of the space, how far it has spread and the number of visits it needs. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Al Wurud.

Nearby districts we cover

Other services in Al Wurud

Other services we provide to residents of Al Wurud.

All services

Need fly control in Al Wurud? Tell us what you saw and we will tell you what it needs

We reach Al Wurud at a time we agree, and you get the full cost before we start.

Call now +966 57 336 7012 WhatsApp