A technician checking the inside wall of a concrete water tank with a torch
What our clients rate us

Tank leak repair in South Obhur Jeddah

South Obhur sits directly on the shore of Obhur Creek, with numerous villas, chalets and coastal resorts. Tanks here endure salt-laden wind, high moisture and extreme weather. Sea salt accelerates corrosion of tank walls and pipe entries, and cracks must be repaired quickly before they widen.

  • Potable-rated materials

    Linings and disinfectants cleared for drinking water tanks, not general-purpose products.

  • You get the downtime first

    How many hours the tank is out of service, told before we start rather than after we finish.

  • A first-draw flush

    We run the first draw off after refilling, and the tank is not handed back until the water runs clear.

  • Ground and roof tanks

    Villas, apartment blocks and premises that need a written record of each visit.

Why the job is different in South Obhur

Coastal villas and resorts use large tanks for freshwater storage and daily supply, suffering frequent leaks due to persistent salt spray and high humidity year-round. The method is set out in full on our Tank leak repair service.

The first reason

Tank vessels mounted on villa and chalet roofs exposed directly to sea

Tanks sit on rooftops facing ocean wind, salt and moisture. Rust begins inside and outside together, with cracks first appearing around pipe entry points.

The second reason

Pipes and joints corroding under salt water exposure

Copper and steel pipes corrode rapidly in the coastal environment. Leaks usually occur at junction points between tank and external piping.

The third reason

Large-capacity tanks for resort and high-volume domestic use

Resorts and large villas run tanks of 5000 litres or more. Constant pressure and water weight accelerate corrosion and cracking.

The character of South Obhur

Coastal area: high humidity and salt air through the year

The coastal setting means tanks face constant sea wind, salt spray and moisture. Repair requires extra protective sealing because the coastal environment degrades standard repairs faster than inland.

Before treatment

Where the water leaves decides how it is repaired

A coastal district on the southern shore of Obhur Creek, separated from North Obhur and stretching inland to Madinah Road. The South Obhur corniche is lined with chalets, villas and resorts, while housing projects fill the land behind.

A concrete wall marked with damp and a white salt bloom

Damp and salt on the outside wall

Float valve and outlet inspection determines whether the leak is in the tank body or in external piping exposed to salt wind.

A fine crack running across a concrete surface

The kind of crack

The speed of level drop tells us the leak size and approximate location in the tank.

The corner where a concrete floor meets a wall

The wall to floor junction

The inner tank walls are inspected for rust, white salt and calcium deposits, and corrosion rings.

Water pipes passing through a concrete wall

Pipe entries

Cracks at the pipe entry point are the weakest spot because pressure concentrates there.

A blistered and peeling layer on a concrete surface

The condition of the old lining

Complete drying before repair is essential because high coastal humidity prevents sealant adhesion.

A white plastic water tank standing outside

What the tank is made of

The coastal environment requires additional protective layers after repair to shield the tank from future salt and moisture damage.

How we work

  1. 1

    Inspect and locate the leak

    We close the float valve and the outlet, mark the water level and watch it fall, then check the fittings and the wall beside it. That separates a tank leak from a pipe leak or a float valve that never shuts.

  2. 2

    Drain, clean and dry

    We empty the tank, lift the sediment off the base, wash back to sound concrete and let the surface dry. No repair holds on a damp or dusty face.

  3. 3

    Repair the cracks and the entries

    We cut the crack open, fill it with a non-shrink mortar, inject anything still weeping and rebuild around the pipe sleeve. A joint that moves takes a flexible detail, not a rigid one.

  4. 4

    Refill, test, then sterilise

    We refill, read the level again to confirm the drop has stopped, then sterilise before the water is used, because the tank has been open with tools and hands inside it.

What tank leak repair includes

  • A technician inspecting with a flashlight

    A marked level test

    A reading before and after with everything shut, which establishes that the loss is the tank and not the plumbing.

  • A metal floor drain

    Draining and sediment removal

    Water and silt out of the base, so the floor and the walls can be seen as they really are.

  • A spray nozzle in close detail

    Pressure wash and dry back

    The weak layer and the dust come off, because a repair only holds on sound concrete.

  • A gloved hand applying bait into a joint

    Cracks opened and filled

    The crack is cut open and filled with a non-shrink mortar, and anything still weeping under water pressure is injected.

  • The visit report being written on a clipboard

    Refill and a recorded test

    We refill, read the level again and write the reading down, so the result is not a matter of opinion.

  • A clean kitchen counter after treatment

    Sterilised and back in service

    A wash and a sterilisation once the material has cured, and guidance on running the first fill off before the water is used.

What is different about Obhur Sub-Municipality

Obhur sub-municipality runs along Jeddah's northern shoreline from Al Shati up to Obhur Creek. It mixes large villas and gated compounds with busy commercial spines of restaurants, cafes, markets and hotels. Sea humidity is high for most of the year and salt laden breezes keep timber and render damp, while irrigated gardens and lawns surround the corniche and the villa plots. Standing irrigation water, dense planting and food waste from the hospitality strip suit cockroaches, mosquitoes and ants, and the chalets and rest houses scattered along the creek stand empty for long spells, which lets insects and rodents settle undisturbed.

Questions about this district

Do steel tanks rust faster on the coast than inland?

Much faster. Salt and moisture cause corrosion very rapidly. Steel tanks may need repair every two or three years on the shore.

Is water leaking from inside the tank or entering from outside?

We close the float valve and outlet and watch the level. If it drops quickly, the leak is in the tank itself. If stable, the problem lies in external piping.

What makes leaks so common in South Obhur specifically?

The harsh coastal environment. Salt corrodes metals from inside and outside at once, and high humidity speeds decay.

Is sealing a crack with waterproof coating enough, or must we repair the tank first?

No. We drain, clean and dry the tank first, then repair the crack or pipe entry. Sealant comes after repair, never instead of it.

Are new tanks better than old ones in this coastal location?

Yes, modern tanks have better protective layers. But on the coast, any tank needs continuous maintenance and salt protection.

How often should we clean the tank to prevent leaks?

Cleaning does not prevent leaks but reveals them. We recommend annual inspection to spot rust and early cracking from salt buildup.

How much does tank leak repair in South Obhur cost?

It is set after the inspection, because the price follows the type of infestation, the size of the space, how far it has spread and the number of visits it needs. Send a photo and a description on WhatsApp and we will give you an estimate before we reach South Obhur.

Nearby districts we cover

Other services in South Obhur

Other services we provide to residents of South Obhur.

All services

Need tank leak repair in South Obhur? Tell us what you saw and we will tell you what it needs

We reach South Obhur at a time we agree, and you get the full cost before we start.

Call now +966 57 336 7012 WhatsApp