Water tank sterilization in Al Sanabel Makkah
Al Sanabel is a relatively new residential district, formerly part of the Satr scheme within Al Aziziyah, bounded by King Khalid Road, the Third Ring Road and Muzdalifah Road. Tanks here are modern but consumption grows each year as the population and retail presence expand. Water is affected by dust from open ground around the district and tanks need regular cleaning to prevent sediment and biofilm buildup.
-
Potable-rated materials
Linings and disinfectants cleared for drinking water tanks, not general-purpose products.
-
You get the downtime first
How many hours the tank is out of service, told before we start rather than after we finish.
-
A first-draw flush
We run the first draw off after refilling, and the tank is not handed back until the water runs clear.
-
Ground and roof tanks
Villas, apartment blocks and premises that need a written record of each visit.
Why the job is different in Al Sanabel
Buildings are recently constructed and the core infrastructure is relatively new, but tanks have begun collecting dust and moisture from the new soil conditions around the district. The method is set out in full on how we approach Water tank sterilization.
New buildings with standard tanks but growing consumption
Tanks were designed for a fixed resident population, but the district is expanding and flats are rented to larger families. Consumption has grown beyond tank capacity, causing sediment to resuspend from the base rapidly.
New soil and open ground increase dust in the water
The district is newly built and open areas around buildings are unpaved or exposed earth. Dust and sand enter tanks through ventilation shafts, increasing sediment and accelerating biofilm formation.
Small hotels provide continuous warmth and moisture
Small hotels and residential units sometimes share tanks. Bathrooms and kitchens provide warm water and high humidity, accelerating bacterial and algal growth even in new tanks.
The character of Al Sanabel
Apartment district: residential blocks, repeated floors and shared entrances
A new residential district with standard tanks but an unstable surrounding environment. Dust from open ground and rapid consumption growth mean sterilization must be more frequent than in settled quarters, with emphasis on removing sandy and clay sediment before disinfectant application.
What we read inside the tank before anything starts
A small residential district, formerly part of the Satr scheme within Al Aziziyah, lying immediately south of that district and bounded by King Khalid Road, Muzdalifah Road and the Third Ring Road. Neighbourhood mosques, parks and government offices punctuate the built fabric.
Sediment on the floor
Sandy and clay sediment appears quickly at tank bases, originating from surrounding dust, recent construction material and high consumption rates.
The slime film on the wall
Biofilm forms on tank walls due to warm water from hotels and residential flats, with bacteria feeding on organic sediment.
Light and heat
Tank ventilation and openings allow dust from exposed ground around the district to enter, especially during dry periods and strong winds.
The lining and any cracking
Humidity is high from warm water in hotels, bathrooms and kitchens, and new construction traps moisture in tanks.
The lid and the openings
New concrete tanks may contain construction sediment (cement dust, sand, iron particles) that remains at the base for years.
What shows up at the tap
Consumption grows rapidly in a new district, raising sediment and biofilm formation rates faster than in established quarters.
How we work
-
1
Inspect and record the condition
We open the hatch and work through what the tank is made of and how big it is, how deep the sediment lies, the state of the lining, whether the lid and the overflow seal, and whether there is a crack that has to be repaired before any sterilizing.
-
2
Drain and lift the sediment out
The water goes out, then the silt and sand are lifted off the floor by suction rather than pushed toward the outlet, because pushing them sends them into the house pipework and the heater.
-
3
High pressure wash
Walls, floor, corners and the area around the outlet, until the slime film is completely gone. This is the step that makes the sterilizing after it mean anything.
-
4
Sterilize, rinse, then return to service
The sterilizing agent goes onto the walls, the floor and the underside of the lid and is left for its contact time, then we rinse, refill and run the furthest tap until the whole line is clear.
What water tank sterilization includes
-
A recorded inspection
Material, capacity, sediment depth, the state of the lining, the lid and the overflow, all before any work begins.
-
Draining and sediment removal
The water out, and the silt and sand lifted off the floor instead of being pushed into the outlet and the house pipework.
-
High pressure washing
Walls, corners and around the outlet, until the biofilm that no disinfectant penetrates has gone.
-
Sterilizing the internal surfaces
A sterilizing agent meant for drinking water tanks, applied to the walls, the floor and the underside of the lid, and left for its contact time.
-
Line flush and aftercare
Rinse, refill and a flush from the furthest tap, when the water is usable again, and what to change in the filter afterwards.
-
The next cycle
We agree the right interval for your tank from how it is filled, how much sun it takes and the condition of the lid.
What is different about Al Aziziyah (Makkah) Sub-Municipality
Al Aziziyah sub municipality runs from the Bin Dawood markets to the Al Hada road and carries pilgrim traffic to Mina. Hotel towers and furnished apartment blocks fill and empty with the Hajj and Ramadan seasons, and the kitchens, restaurants and markets along Al Masjid Al Haram Road and King Abdulaziz Road leave food waste at every peak. Southwards the fabric loosens into villas and planned streets in An Naseem and Al Awali, then Al Abidiyah's campus and the old farms of Al Husayniyah, where Wadi Uranah holds water after rain and farm enclosures shelter rodents and reptiles.
Questions about this district
Do new tanks not need sterilization as often as old ones?
New tanks still need sterilization. Construction dust and water cause sediment buildup, and bacteria colonize even modern tanks rapidly.
Why does sediment appear quickly in Al Sanabel despite the tank being new?
The district is new and ground is exposed. Dust enters the tank easily, and consumption has exceeded the tank's original design capacity.
Does reducing water consumption lower sediment and contamination?
Yes, but real reduction requires household cooperation. Regular sterilization and cleaning are more effective than attempting consumption reduction alone.
Do new tanks also need new pipes?
Not necessarily. Existing pipes are usually adequate if intact. However, long pipes from tank to first-use point may collect residual particles.
How often should tanks be sterilized in a new district like Al Sanabel?
At least once yearly, and if dust is high in the district or consumption is elevated, twice yearly may be needed.
Do green spaces and parks around buildings reduce dust entering tanks?
Yes, landscaping and paved areas reduce airborne dust. However, even with parks, tanks need regular cleaning because dust enters through ventilation shafts.
How much does water tank sterilization in Al Sanabel cost?
It is set after the inspection, because the price follows the type of infestation, the size of the space, how far it has spread and the number of visits it needs. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Al Sanabel.
Nearby districts we cover
Other services in Al Sanabel
Other services we provide to residents of Al Sanabel.
-
Water tanks
Water tank cleaning
-
Water tanks
Water tank sealing
-
Water tanks
Tank leak repair
-
Residential
Cockroach control
Need water tank sterilization in Al Sanabel? Tell us what you saw and we will tell you what it needs
We reach Al Sanabel at a time we agree, and you get the full cost before we start.