Fly control in Al Nazlah Al Sharqiyah, Jeddah

Targeted, not broadcast

Product goes into cracks and runways, never sprayed across open surfaces.
Told before we start

What we will use, where it goes, and what to cover or move before we arrive.
A follow-up visit

We return after the first treatment, because what survives it does not show on the day.
Homes and businesses

Apartments and villas, and kitchens and stores that need a record of each visit.

Why they keep coming back in Al Nazlah Al Sharqiyah

Flies in apartment blocks concentrate at stairwells, shared entrances and common areas where waste from many units gathers in one place, creating repeated breeding sites. The method is set out in full on our Fly control service.

The first reason

Shared passages move flies between individual flats

In blocks where flats adjoin one another, flies do not stay within one unit. They move across stairwells, passages, shared vents and gaps under doors. Treating a single flat without addressing the shared entrance, stairwell and common passages leaves the door open for new infestations to arrive every day from neighbouring units.

The second reason

Communal waste bins at ground level breed flies for all floors

Shared waste containers at the base of the building provide safe breeding grounds for flies. Waste from dozens of flats collects in one place and ferments, creating perfect conditions for the full cycle from egg to adult fly. Without regular treatment of the bin base and surrounding area, numbers return rapidly to every floor above.

The third reason

Old drainage under the building hosts permanent larvae populations

Aged pipes beneath apartment blocks carry organic buildup and hairline fissures where larvae thrive in the dark. Moisture and fermented residue in old drainage provide constant breeding habitat. Flies emerge from this network into occupied space via floor drains and gaps beneath floor slabs, appearing in multiple flats simultaneously.

Al Nazlah Al Sharqiyah on the map

Al Nazlah Al Sharqiyah sits about 1 km from Al Nazlah Al Yamaniyah and about 1.5 km from Al Thaghr.

Open in Google Maps

Before treatment

Where the flies are actually coming from

Older apartment buildings contain old drainage runs and shared entrances that provide natural passageways for flies to move between flats and floors of the same block.

House fly

House flies in apartment blocks concentrate at shared entrances, stairwells and common passages where they find food traces and moisture from several units draining or cooking simultaneously.

A metallic green fly on a wooden surface

Blow fly

Blow flies normally avoid indoors but enter at external doors, fissures and gaps in the weathered facades of older blocks, especially where rubbish sits near the entrance.

Fermenting residue

Fermenting residue accumulates in the shared bin base and in gaps beneath stairwells and passages where waste from multiple floors collects, ferments and attracts breeding colonies.

The bin base

The shared bin base at ground level is a primary breeding hub where waste from dozens of flats gathers in one space, ferments continuously and hosts dense larval development.

The film inside a drain

Old pipes running beneath stairwells and passages hold permanent moisture and organic matter, providing ideal conditions for larvae and pupae to develop unseen in the building's infrastructure.

A metal service door on a building exterior

The service door and its mesh

The shared entrance door and its mesh vent allow flies from outside into the common passage, from which they spread to individual flats via stairwell access and utility penetrations.

How we work

1
Inspect and trace the source

We trace the flies back to their medium: waste and the bin area, floor traps, drain runs and any standing organic wetness, and we identify the species from its size, its flight and where it settles.
2
Treat the breeding medium

Washing and scouring bin bases and floor traps, and a foam that treats the film inside the pipe, because removing the medium is the only thing that stops production.
3
Treat the resting surfaces

A fly spends most of its time settled on ceilings, cables, the tops of walls and the sunlit wall outside the door, and that is where the residual and the bait go, not into the air.
4
Proofing and the follow-up

We close the ways in and sort out the screens and the doors, then come back on a date matching the emergence of the pupae that were already in the medium on the first visit.

What fly control includes

A source tracing inspection

The species, the breeding medium and the route in, established before anything is applied.
Drains and floor traps

Scouring the film stuck inside the pipe and treating it with foam, which is where drain flies come from and almost nowhere else.
Residual on the resting surfaces

Ceilings, cables, the tops of walls and the sunlit wall outside the door, kept off food preparation surfaces.
Fly bait in protected positions

An attractant bait set at bin areas and service entrances, out of reach of children and pets and away from food.
Aftercare instructions

Ventilation, what to cover, and what needs a screen, an air curtain or a different waste routine.
A scheduled follow-up

A set date matching the emergence of the pupae, and re-treatment of any source still producing.

The character of Al Nazlah Al Sharqiyah

Apartment district: residential blocks, repeated floors and shared entrances

Flats in apartment blocks are not fully isolated from one another; flies exploit shared entrances, passages and utility routes to move freely.

Questions about this district

Why do flies return to my flat even after I removed the rubbish?

Cleanliness alone is not sufficient if flies are entering from the shared passage or under the door. You need treatment of the common entrance, stairwell and bin base at the same time. Flies move between units through shared spaces and gaps. Individual flat treatment without addressing the building's common areas leaves you vulnerable to re-entry from neighbouring units.

Do I need to treat the shared passage and stairs along with my flat?

Yes, treating shared passages, stairwells, shared entrances and the bin area is essential in apartment blocks. These are the main routes flies use to move between flats. Without treating them, flies will continue to enter your flat from other units and from the communal waste sources.

How do flies get into my flat from the neighbouring flat next door?

Flies pass through small gaps around doors, shared pipes and utilities between units. Drainage pipes, ventilation runs and cracks in shared walls offer movement routes. Openings that seem too small for the eye are sufficient for flies to pass through and establish themselves in multiple flats.

Is treating just the bin base enough for the whole apartment block?

No, treating the bin base is important but not sufficient on its own. Shared passages, stairwells, drainage runs and gaps beneath doors must also be addressed. Apartment blocks need integrated treatment of breeding sources, movement routes and entry points throughout the building.

Are there fewer flies on the ground floor than on the upper floors?

No, flies occur on all floors equally. The bin area, shared entrance and stairwell provide direct access from ground level to every storey above. Flies move both vertically and horizontally through passages, utility runs and shared spaces in the block.

When does fly pressure peak in an apartment block like this?

Flies multiply rapidly when waste accumulates in the shared bin, especially on warm, humid days. In summer and autumn, generations double quickly. Regular treatment and continuous waste management are essential to keep numbers down across all floors of the building.

How much does fly control in Al Nazlah Al Sharqiyah cost?

It is set after the inspection, because the price follows the type of infestation, the size of the space, how far it has spread and the number of visits it needs. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Al Nazlah Al Sharqiyah.