Fly control in Qurtubah, Makkah

Targeted, not broadcast

Product goes into cracks and runways, never sprayed across open surfaces.
Told before we start

What we will use, where it goes, and what to cover or move before we arrive.
A follow-up visit

We return after the first treatment, because what survives it does not show on the day.
Homes and businesses

Apartments and villas, and kitchens and stores that need a record of each visit.

Why they keep coming back in Qurtubah

Open industrial spaces and wide yards offer expansive space for flies to spread into, and here flies do not shelter in tight corners but appear on broad walls and exposed surfaces in daylight. The method is set out in full on our Fly control service.

The first reason

Open workshops and neglected drainage

Workshops on Al Hajj Street operate with doors open and aging drains run below them. Grease and machine oil flow into open drainage channels uncleaned, becoming unlimited feeding ground for green and house flies together.

The second reason

Bare ground, dust and standing water

Wide open industrial plots without shade offer intense heat and direct sun, and surface drainage pools in low spots and becomes mosquito-breeding swamps. Flies arrive in swarms drawn to the water and dampness.

The third reason

Popular market and constant traffic movement

The popular market on the wide road brings heavy foot traffic and Hajj season car travel, with litter dropped on roadsides without collection. Flies emerge in waves on workshop and shop roofs during busy selling hours and peak traffic.

Landmarks of Qurtubah

Fly control in Qurtubah starts from Al Hajj Street as the main industrial axis and extends to Souq Al Hijaz and workshops on both sides of the wide street, with focus on open drainage and industrial yards.

Al Hajj Street
Third Ring Road
Al Dawas Market
Souq Al Hijaz

Before treatment

Where the flies are actually coming from

A northern industrial district on Al Hajj Street at the third ring road, with industrial plots, workshops and warehouses beside the old Dawas market and Souq Al Hijaz on a wide street, and fuel stations marking junctions.

House fly

House flies are drawn to workshops and warehouses because open doors and neglected drainage provide constant food, and shade inside buildings offers shelter where they rest.

A metallic green fly on a wooden surface

Blow fly

Blow flies come from grease and oil in open drain channels and from waste lying on bare ground uncovered and exposed to the heat and sun.

Fermenting residue

Fermenting residue collects in open drain outlets and in low spots on ground that hold water, and continuous dampness creates perfect fly breeding conditions.

The bin base

The bin base in an industrial area stands on bare ground in direct sun, and stagnant water and grease in the base attract migrating fly populations strongly.

The film inside a drain

The drain film grows rapidly in open drainage channels because workshop machinery oil and waste accumulate in them daily, becoming a prime fly breeding ground.

A metal service door on a building exterior

The service door and its mesh

Ventilation and door openings in workshops and warehouses do not need fine domestic mesh but need protection from large flies entering from open industrial spaces.

How we work

1
Inspect and trace the source

We trace the flies back to their medium: waste and the bin area, floor traps, drain runs and any standing organic wetness, and we identify the species from its size, its flight and where it settles.
2
Treat the breeding medium

Washing and scouring bin bases and floor traps, and a foam that treats the film inside the pipe, because removing the medium is the only thing that stops production.
3
Treat the resting surfaces

A fly spends most of its time settled on ceilings, cables, the tops of walls and the sunlit wall outside the door, and that is where the residual and the bait go, not into the air.
4
Proofing and the follow-up

We close the ways in and sort out the screens and the doors, then come back on a date matching the emergence of the pupae that were already in the medium on the first visit.

What fly control includes

A source tracing inspection

The species, the breeding medium and the route in, established before anything is applied.
Drains and floor traps

Scouring the film stuck inside the pipe and treating it with foam, which is where drain flies come from and almost nowhere else.
Residual on the resting surfaces

Ceilings, cables, the tops of walls and the sunlit wall outside the door, kept off food preparation surfaces.
Fly bait in protected positions

An attractant bait set at bin areas and service entrances, out of reach of children and pets and away from food.
Aftercare instructions

Ventilation, what to cover, and what needs a screen, an air curtain or a different waste routine.
A scheduled follow-up

A set date matching the emergence of the pupae, and re-treatment of any source still producing.

What is different about Al Maabdah Sub-Municipality

Al Maabdah sub municipality climbs from Al Abtah and Al Jumayzah beside the Al Mualla cemetery up through Al Khansa and Rai Adhakhir to Al Adl, Jabal Al Nour, Wadi Jaleel and Qurtubah on the outer ring roads. It mixes hotels and pilgrim housing near the Grand Mosque with old popular houses on hillside passes, new housing schemes on valley floors that carry flash floods after rain, and industrial plots, workshops and warehouses along Al Hajj Street in Qurtubah. Street widening and expropriation leave partly demolished frontages in Al Khansa.

Questions about this district

Do open workshops provide an endless fly breeding source?

Yes, extensively. Workshops operate with open doors and neglected drains carry grease and oil that feed flies constantly. Treatment focuses on open drain channels and broad surfaces where flies rest and breed.

How do I keep flies out of my warehouse in an industrial area?

We fit strong mesh screens on warehouse windows and doors, and treat all drainage and ventilation openings regularly. We also clear the area around your warehouse of food scraps and standing water.

Standing water in open ground drainage. Does this increase flies?

Significantly. Stagnant water on bare ground attracts flies in huge numbers, and grease and dirt in it provide continuous food. Clearing standing water and ensuring proper drainage greatly reduces the problem.

The nearby market and constant movement. Does it affect my location?

Directly. The market brings fly swarms and constant traffic transports flies from place to place. Treatment focuses on sealing your warehouse entrances to stop flies from getting inside.

The wide street lets flies travel easily. Is that a problem?

Yes, open spaces and wide roads let flies fly and spread much more easily than tight alleys. However, the wide street also lets air move more freely, which may help reduce the odours that attract flies.

How many treatment visits do I need in an industrial area like Qurtubah?

An industrial zone needs weekly treatment for three weeks initially, then fortnightly maintenance. If neighbouring workshops are neglected, additional repeated treatments may be necessary.

How much does fly control in Qurtubah cost?

It is set after the inspection, because the price follows the type of infestation, the size of the space, how far it has spread and the number of visits it needs. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Qurtubah.