A technician checking the inside wall of a concrete water tank with a torch
What our clients rate us

Tank leak repair in Al Abidiyah Makkah

Al Abidiyah is the modern Umm Al Qura University campus on the Taif road southeast of the city, home to the colleges of Sharia, Engineering and Medicine, the university hospital, student housing, King Abdullah University Library and the stadium. Tanks here are numerous and large, serving hundreds of students, staff and patients. Leaks in these critical facilities compromise water supply to clinics, laboratories and dormitories.

  • Potable-rated materials

    Linings and disinfectants cleared for drinking water tanks, not general-purpose products.

  • You get the downtime first

    How many hours the tank is out of service, told before we start rather than after we finish.

  • A first-draw flush

    We run the first draw off after refilling, and the tank is not handed back until the water runs clear.

  • Ground and roof tanks

    Villas, apartment blocks and premises that need a written record of each visit.

Why the job is different in Al Abidiyah

Academic and medical facilities operate under very high water consumption, and the large concrete tanks face intense heat and direct sun exposure year-round. The method is set out in full on Tank leak repair in detail.

The first reason

Large tanks in the hospital and student housing

The university hospital tanks are very large and serve emergency departments, operating theatres and clinics. Student housing requires separate tanks for each residential complex with large occupancy. A small leak here wastes hundreds of litres daily.

The second reason

Concrete exposed to intense heat and direct sun

Tanks are built from reinforced concrete and face extreme summer heat. Continuous expansion and contraction cause cracks and stress fractures in walls and floors.

The third reason

Heavy use and constant pressure

Hospitals, clinics and laboratories consume water at high intensity around the clock. Continuous tank pressure stresses pipes and causes leaks at connection points and pipe entries.

Al Abidiyah on the map

Al Abidiyah sits about 4.5 km from Al Safrah and about 4.5 km from Al Awali.

Open in Google Maps
Before treatment

Where the water leaves decides how it is repaired

A relatively new university campus on the Taif road containing academic, medical and residential buildings, surrounded by the Arafat plain and sections of Wadi Uranah and Wadi Numan.

A concrete wall marked with damp and a white salt bloom

Damp and salt on the outside wall

Level drop testing is precise in large tanks because slow leaks may not be obvious without several hours of monitoring.

A fine crack running across a concrete surface

The kind of crack

Inspection of pipe entry and exit points is critical in student housing and the hospital because pressure is high and pipes are numerous.

The corner where a concrete floor meets a wall

The wall to floor junction

Cracks and stress fractures in concrete walls appear quickly because heat and direct sun in the region are severe.

Water pipes passing through a concrete wall

Pipe entries

Moisture inside the tank may cause algae and bacterial growth, especially in student housing where use is heavy and water is warm.

A blistered and peeling layer on a concrete surface

The condition of the old lining

The leak location may be on the floor, walls or at connection points, and full drainage is needed to reach it.

A white plastic water tank standing outside

What the tank is made of

Continuous leakage raises water bills sharply at the hospital and housing, and quick repair saves water and money.

How we work

  1. 1

    Inspect and locate the leak

    We close the float valve and the outlet, mark the water level and watch it fall, then check the fittings and the wall beside it. That separates a tank leak from a pipe leak or a float valve that never shuts.

  2. 2

    Drain, clean and dry

    We empty the tank, lift the sediment off the base, wash back to sound concrete and let the surface dry. No repair holds on a damp or dusty face.

  3. 3

    Repair the cracks and the entries

    We cut the crack open, fill it with a non-shrink mortar, inject anything still weeping and rebuild around the pipe sleeve. A joint that moves takes a flexible detail, not a rigid one.

  4. 4

    Refill, test, then sterilise

    We refill, read the level again to confirm the drop has stopped, then sterilise before the water is used, because the tank has been open with tools and hands inside it.

What tank leak repair includes

  • A technician inspecting with a flashlight

    A marked level test

    A reading before and after with everything shut, which establishes that the loss is the tank and not the plumbing.

  • A metal floor drain

    Draining and sediment removal

    Water and silt out of the base, so the floor and the walls can be seen as they really are.

  • A spray nozzle in close detail

    Pressure wash and dry back

    The weak layer and the dust come off, because a repair only holds on sound concrete.

  • A gloved hand applying bait into a joint

    Cracks opened and filled

    The crack is cut open and filled with a non-shrink mortar, and anything still weeping under water pressure is injected.

  • The visit report being written on a clipboard

    Refill and a recorded test

    We refill, read the level again and write the reading down, so the result is not a matter of opinion.

  • A clean kitchen counter after treatment

    Sterilised and back in service

    A wash and a sterilisation once the material has cured, and guidance on running the first fill off before the water is used.

The character of Al Abidiyah

New development: ongoing construction and vacant plots between the homes

A new university campus means modern reinforced concrete tanks, but they face intense heat and direct sun exposure. Treatment must account for the fact that tanks here are large and serve critical facilities like the hospital, so repairs must be precise and safe.

Questions about this district

How do we know if the leak is in the tank itself and not the plumbing?

We close the float valve and the outlet valve and watch the level. If it falls on its own, the leak is in the tank.

Does a small leak in the hospital tank affect medical operations?

It can. Continuous loss may reduce pipe pressure and compromise supply to clinics and operating theatres.

Why do academic facility tanks crack quickly?

Intense heat, direct sun and continuous pressure cause concrete expansion. Small cracks form and enlarge over time.

Is repairing one spot or patch enough?

Not necessarily. We must drain, clean and dry the tank completely before repair, because lining comes after repair, never instead of it.

How often should student housing tanks be inspected?

At least once a year. Heavy use and large occupancy mean higher leak risk.

Do we need to empty student housing during tank repair?

Yes, the tank must be fully drained. We may work at night or use temporary storage tanks to minimise disruption.

How much does tank leak repair in Al Abidiyah cost?

It is set after the inspection, because the price follows the type of infestation, the size of the space, how far it has spread and the number of visits it needs. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Al Abidiyah.

Nearby districts we cover

Other services in Al Abidiyah

Other services we provide to residents of Al Abidiyah.

All services

Need tank leak repair in Al Abidiyah? Tell us what you saw and we will tell you what it needs

We reach Al Abidiyah at a time we agree, and you get the full cost before we start.

Call now +966 57 336 7012 WhatsApp