A technician checking the inside wall of a concrete water tank with a torch
What our clients rate us

Tank leak repair in Al Taqwa Makkah

Al Taqwa is a new hillside district south of Al Misfalah where the old informal settlement was cleared and redeveloped. Tanks here sit on steep slopes and uneven terrain, with pipes climbing and descending the harsh topography. Leaks may come from flexible pipes that shift with ground movement or weak connections across the slopes.

  • Potable-rated materials

    Linings and disinfectants cleared for drinking water tanks, not general-purpose products.

  • You get the downtime first

    How many hours the tank is out of service, told before we start rather than after we finish.

  • A first-draw flush

    We run the first draw off after refilling, and the tank is not handed back until the water runs clear.

  • Ground and roof tanks

    Villas, apartment blocks and premises that need a written record of each visit.

Why the job is different in Al Taqwa

The district was built after clearing the old informal settlement and remains under active construction. Terrain is severely sloped and foundations sit on hillsides. The method is set out in full on what Tank leak repair involves.

The first reason

Slope movement shifts pipes and tanks

Land in Al Taqwa is elevated and steeply sloped. Tanks and pipes shift with ground movement on the hillside. Flexible connections may separate or crack from continuous motion.

The second reason

Public housing schemes may use economy-grade tanks and pipes

Public housing projects use economical designs and pipes that may be low-cost. Used or repaired tanks may leak quickly.

The third reason

Tank access is difficult across scattered slopes

Tanks are scattered across the hillside and may be far from the main road. Access requires extra effort and distance may cause pressure drop.

The character of Al Taqwa

New development: ongoing construction and vacant plots between the homes

The district is new and under active construction, meaning ground and terrain are not yet stable. Tanks and pipes shift with soil and vibrations from equipment and building work. Repair must account for uneven pressure across slopes and weak connections on moving hillside terrain.

Before treatment

Where the water leaves decides how it is repaired

A newly developed district on the elevated zone south of Al Misfalah around Qawz Al Nakasah, with public housing schemes, land grants and buildings under construction threaded by Al Taqwa Street on the steep hillside.

A concrete wall marked with damp and a white salt bloom

Damp and salt on the outside wall

Tanks on slopes may leak from the bottom or sides if not placed on stable level ground.

A fine crack running across a concrete surface

The kind of crack

Flexible pipes that climb and descend slopes may separate from connections due to ground movement and continuous vibration.

The corner where a concrete floor meets a wall

The wall to floor junction

Pressure balance valves may fail on slopes due to uneven pressure and water flowing at different speeds.

Water pipes passing through a concrete wall

Pipe entries

Moisture may come from slow leaks in buried pipes crossing the hillside soil, unnoticed for long periods.

A blistered and peeling layer on a concrete surface

The condition of the old lining

Tank location on exposed slopes means direct sun exposure and strong winds that may loosen fastening.

A white plastic water tank standing outside

What the tank is made of

Leaks often appear first as slow seepage from pipes or connections, then worsen to faster leaks if untreated.

How we work

  1. 1

    Inspect and locate the leak

    We close the float valve and the outlet, mark the water level and watch it fall, then check the fittings and the wall beside it. That separates a tank leak from a pipe leak or a float valve that never shuts.

  2. 2

    Drain, clean and dry

    We empty the tank, lift the sediment off the base, wash back to sound concrete and let the surface dry. No repair holds on a damp or dusty face.

  3. 3

    Repair the cracks and the entries

    We cut the crack open, fill it with a non-shrink mortar, inject anything still weeping and rebuild around the pipe sleeve. A joint that moves takes a flexible detail, not a rigid one.

  4. 4

    Refill, test, then sterilise

    We refill, read the level again to confirm the drop has stopped, then sterilise before the water is used, because the tank has been open with tools and hands inside it.

What tank leak repair includes

  • A technician inspecting with a flashlight

    A marked level test

    A reading before and after with everything shut, which establishes that the loss is the tank and not the plumbing.

  • A metal floor drain

    Draining and sediment removal

    Water and silt out of the base, so the floor and the walls can be seen as they really are.

  • A spray nozzle in close detail

    Pressure wash and dry back

    The weak layer and the dust come off, because a repair only holds on sound concrete.

  • A gloved hand applying bait into a joint

    Cracks opened and filled

    The crack is cut open and filled with a non-shrink mortar, and anything still weeping under water pressure is injected.

  • The visit report being written on a clipboard

    Refill and a recorded test

    We refill, read the level again and write the reading down, so the result is not a matter of opinion.

  • A clean kitchen counter after treatment

    Sterilised and back in service

    A wash and a sterilisation once the material has cured, and guidance on running the first fill off before the water is used.

What is different about Al Misfalah Sub-Municipality

Al Misfalah sub municipality runs downhill from the south of the Grand Mosque through Al Misfalah, Kudai and Al Rawabi to Al Taqwa, Al Hindawiyah, Al Khalidiyah and Al Rusayfah at the third ring road. The northern end is old apartment blocks and pilgrim hotels with restaurants along Ibrahim Al Khalil Street and the huge coach parks at Kudai. The south and west are dense popular districts with countless small shops and unplanned hillside housing, some of it already cleared for redevelopment, giving way to orderly land grant schemes in Al Rusayfah beside the railway station.

Questions about this district

Why do leaks appear in an area still under construction like Al Taqwa?

Ground shifts and vibrations from construction affect pipes and tanks. Temporarily installed pipes may not be fully sealed.

Does steep terrain affect water pressure?

Yes. Water climbs and pipes descend across the slopes. Uneven pressure may crack pipes and connections.

Are flexible pipes better than rigid ones on a slope?

Flexible pipes move with soil but may separate from connections. Rigid pipes are stronger but crack from continuous ground motion.

How long might a tank last on a hillside?

If sealed well and connected properly, several years. But ground movement and vibration may shorten its life.

Should the tank be level on a slope?

Yes. The tank must sit level to distribute pressure evenly. A tilted tank may leak from one side.

Does ongoing construction in Al Taqwa affect existing tanks?

Yes. Vibrations from excavators and heavy equipment affect nearby tanks and pipes. Regular inspection is needed.

How much does tank leak repair in Al Taqwa cost?

It is set after the inspection, because the price follows the type of infestation, the size of the space, how far it has spread and the number of visits it needs. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Al Taqwa.

Nearby districts we cover

Other services in Al Taqwa

Other services we provide to residents of Al Taqwa.

All services

Need tank leak repair in Al Taqwa? Tell us what you saw and we will tell you what it needs

We reach Al Taqwa at a time we agree, and you get the full cost before we start.

Call now +966 57 336 7012 WhatsApp