A technician checking the inside wall of a concrete water tank with a torch
What our clients rate us

Tank leak repair in Khadra Makkah

Khadra is a new residential district on King Faisal Road between Al Muaysim and Al Sharai, with buildings still under construction and tanks freshly mounted on roofs and basement levels. Fast building means tanks without adequate settlement time, and new pipes face initial pressure from heavy water load and thermal stress.

  • Potable-rated materials

    Linings and disinfectants cleared for drinking water tanks, not general-purpose products.

  • You get the downtime first

    How many hours the tank is out of service, told before we start rather than after we finish.

  • A first-draw flush

    We run the first draw off after refilling, and the tank is not handed back until the water runs clear.

  • Ground and roof tanks

    Villas, apartment blocks and premises that need a written record of each visit.

Why the job is different in Khadra

Buildings are still under construction and tanks are newly installed. Leaks appear quickly in the first year of operation because concrete has not fully cured. The method is set out in full on what Tank leak repair involves.

The first reason

Fresh tank concrete on building roofs not yet dry

Tanks are mounted on roof slabs before concrete has fully cured. Heavy water load and initial pressure expose hairline cracks in young concrete and immature seams.

The second reason

New pipes and rushed joints buried underground

New copper and plastic pipes are installed fast on a grid layout. Accelerated joints and high pressure from full tanks cause leaks within the first weeks.

The third reason

Rapid building handover leaves tanks unmonitored

New apartments fill quickly and tanks are pressurised at once. No one inspects roofs regularly and small leaks compound before they are noticed.

Khadra on the map

Khadra sits about 2 km from Muad and about 3 km from Badr.

Open in Google Maps
Before treatment

Where the water leaves decides how it is repaired

A new residential district on King Faisal Road between Al Muaysim and Al Sharai, expanding into the former Haram boundary and the old Sharai Scheme Seven footprint. Apartment buildings are rising with street-level shops, though schools and municipal services lag behind.

A concrete wall marked with damp and a white salt bloom

Damp and salt on the outside wall

Hairline cracks in fresh concrete appear on surfaces and corners where initial pressures concentrate.

A fine crack running across a concrete surface

The kind of crack

New copper and plastic pipes leak at seams because adhesive has not fully set.

The corner where a concrete floor meets a wall

The wall to floor junction

Rapid loss occurs at first filling and high pressure, and may be in the tank or pipes below ground floors.

Water pipes passing through a concrete wall

Pipe entries

Excess moisture from young concrete and heavy water load increases early leaks.

A blistered and peeling layer on a concrete surface

The condition of the old lining

Cracks lie in the tank body, seams and pipes, and develop from early pressure.

A white plastic water tank standing outside

What the tank is made of

Seasonal loss may not show in new tanks, but constant leakage from the start signals concrete and joint defects.

How we work

  1. 1

    Inspect and locate the leak

    We close the float valve and the outlet, mark the water level and watch it fall, then check the fittings and the wall beside it. That separates a tank leak from a pipe leak or a float valve that never shuts.

  2. 2

    Drain, clean and dry

    We empty the tank, lift the sediment off the base, wash back to sound concrete and let the surface dry. No repair holds on a damp or dusty face.

  3. 3

    Repair the cracks and the entries

    We cut the crack open, fill it with a non-shrink mortar, inject anything still weeping and rebuild around the pipe sleeve. A joint that moves takes a flexible detail, not a rigid one.

  4. 4

    Refill, test, then sterilise

    We refill, read the level again to confirm the drop has stopped, then sterilise before the water is used, because the tank has been open with tools and hands inside it.

What tank leak repair includes

  • A technician inspecting with a flashlight

    A marked level test

    A reading before and after with everything shut, which establishes that the loss is the tank and not the plumbing.

  • A metal floor drain

    Draining and sediment removal

    Water and silt out of the base, so the floor and the walls can be seen as they really are.

  • A spray nozzle in close detail

    Pressure wash and dry back

    The weak layer and the dust come off, because a repair only holds on sound concrete.

  • A gloved hand applying bait into a joint

    Cracks opened and filled

    The crack is cut open and filled with a non-shrink mortar, and anything still weeping under water pressure is injected.

  • The visit report being written on a clipboard

    Refill and a recorded test

    We refill, read the level again and write the reading down, so the result is not a matter of opinion.

  • A clean kitchen counter after treatment

    Sterilised and back in service

    A wash and a sterilisation once the material has cured, and guidance on running the first fill off before the water is used.

The character of Khadra

New development: ongoing construction and vacant plots between the homes

Fast-tracked new buildings mean tanks without settlement time. Leaks here stem from construction defects and accelerated materials, so treatment requires immediate repair before cracks widen under repeated pressure.

Questions about this district

Do new tanks leak faster than old ones?

Yes. Fresh concrete contains internal moisture and hairline cracks appear when the tank is first filled.

Does a leak in a new tank mean a construction fault?

It may. Tanks were mounted before concrete set, or seams used accelerated materials without proper standards.

How do I stop leaks before they show in a new building?

Regular inspection in the first weeks is essential. New tanks must be checked before full pressure is applied, then monitored weekly.

Does a tank leak damage the foundations of new apartment buildings?

Yes. Leaks saturate soil around the base and cause uneven subsidence of the building.

Why do seams leak more than the tank body?

Seams are installed fast and the sealant may not fully cure. Initial pressure breaks the seal before it hardens.

Does full tank drying stop future leaks?

Not necessarily. If cracks exist in the concrete, leaks return when the tank is refilled.

How much does tank leak repair in Khadra cost?

It is set after the inspection, because the price follows the type of infestation, the size of the space, how far it has spread and the number of visits it needs. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Khadra.

Nearby districts we cover

Other services in Khadra

Other services we provide to residents of Khadra.

All services

Need tank leak repair in Khadra? Tell us what you saw and we will tell you what it needs

We reach Khadra at a time we agree, and you get the full cost before we start.

Call now +966 57 336 7012 WhatsApp