Water tank sealing in Al Rusayfah Makkah
Al Rusayfah is a planned district on the western third ring road with orderly housing schemes, medical complexes and public services. Tanks here are mounted on roofs and buried within homes and buildings, and suffer leaks from cracks and joints due to heat and heavy use. Tanks in this quarter need regular cleaning and repair because the modern infrastructure and water quality standards demand tight seals.
-
Potable-rated materials
Linings and disinfectants cleared for drinking water tanks, not general-purpose products.
-
You get the downtime first
How many hours the tank is out of service, told before we start rather than after we finish.
-
A first-draw flush
We run the first draw off after refilling, and the tank is not handed back until the water runs clear.
-
Ground and roof tanks
Villas, apartment blocks and premises that need a written record of each visit.
Why the job is different in Al Rusayfah
Homes and buildings in Al Rusayfah are relatively new, most built within the last three decades, and tanks face intense heat and direct sun exposure on open rooftops. The method is set out in full on our Water tank sealing service.
Roof-mounted tanks exposed to heat and cracking
Most houses and apartment blocks in Al Rusayfah carry tanks on their roofs. Intense heat and daily thermal expansion and contraction cause cracks in the floor, walls and joints.
Pipe entries and joints as leak sources
Pipes enter the tank from multiple points, and the seals between pipes and walls are often weak or made from older materials. Leaks occur from movement and vibration.
Medical complexes demand high water standards
Clinics and medical centres in the quarter operate under strict hygiene rules. Their tanks need tight seals and regular sterilisation because contaminated water affects patient safety.
Al Rusayfah on the map
Al Rusayfah sits about 1.5 km from Al Hindawiyah and about 2 km from Al Khalidiyah.
Open in Google MapsWhat we read before any material is opened
A planned residential district on the western third ring road with housing projects, apartment blocks and medical complexes. It is bordered by Al Hindawiyah to the east, Al Khalidiyah to the south, Al Nuzha to the north and Al Shawqiyah to the west.
Cracking in the wall
The concrete floor erodes from standing water and moisture, cracks start at floor corners where water pools.
The floor to wall joint
Walls crack from heat stress and daily expansion, vertical cracks are more common than horizontal ones.
The condition of the old lining
The floor-to-wall joint is a major weak point, where most leaks occur due to relative movement.
Sediment and scale
Pipe entries through walls and floor need tight seals, and old pipes may be leak sources themselves.
The pipe entries
The interior floor surface must be smooth and crack-free to allow easy cleaning and prevent silt build-up.
The hatch and the vent
Sterilisation after sealing is essential in medical complexes, and fresh water must be contaminant-free.
How we work
-
1
Inspect with the tank empty
We drain it and read the surface dry: whether the water leaves through a crack, a joint or a pipe collar, and what the outer face of the wall and the ceiling below are telling us. A level test with the valves closed separates a leaking tank from leaking pipework.
-
2
Clean and prepare the substrate
Sediment out, a high pressure wash, the loose old lining and the weak surface layer of the concrete taken back, then dried. The material grips sound substrate and nothing else.
-
3
Make the cracks and joints good
Cracks are chased out and filled with a repair mortar, a cove is formed where the floor meets the wall, and every pipe collar is treated on its own.
-
4
Lining, fill test, sterilisation
Successive coats, each run across the one beneath it, on the face the water touches. Then a full cure, a fill with the level watched, and sterilisation with the first fill run to waste before the tank returns to use.
What water tank sealing includes
-
Finding where the water leaves
Carried out drained and dry: cracks, joints, pipe collars and the outer face of the wall.
-
Draining and sediment removal
The last of the water and the settled layer on the floor come out, because a lining does not stick over sediment.
-
Cracks and joints made good
The crack opened and filled, a cove formed at the floor to wall junction, and each pipe entry worked separately.
-
Lining coats on the water face
More than one coat, each crossing the one below, in material made for drinking water tanks rather than roof waterproofing.
-
Curing, fill test and sterilisation
The material is left to cure, the tank is filled and the level watched, then sterilised and the first fill run to waste. How long the cure takes follows the material and the weather, and we tell you before the date so you can plan around the supply.
-
A follow-up level check
We come back once it is in service to read the level and check the outer face, because any remaining loss shows up then rather than on the day of the work.
The character of Al Rusayfah
Mixed district: shops at street level with homes above them
The district is modern and planned with uniform apartment blocks, but tanks suffer from intense heat and daily thermal stress. Tank treatment focuses on repairing heat-induced cracks and maintaining a flexible seal that withstands high temperatures throughout the year.
Questions about this district
Why do roof tanks in Al Rusayfah crack quickly?
Intense heat and daily thermal stress strain the concrete and joints. UV radiation also degrades materials over time.
Do leaks come from walls or floors?
They come from both. Walls crack from heat stress and floors erode from running water and continuous dampness.
How often do tanks in medical complexes need resealing?
Every five to eight years depending on initial seal quality, daily use levels and heat exposure.
Can a tank be sealed without draining it?
No, the tank must be completely emptied before repair and cleaning. Residual water prevents access to cracks and joints.
Do small cracks need a full reseal or just filling?
Small cracks may spread over time. If very limited, filling may suffice, but a full seal offers more certainty.
How can we ensure the new seal will hold in Al Rusayfah's heat?
The seal must be flexible and UV-resistant. Regular tank cleaning extends seal lifespan.
How much does water tank sealing in Al Rusayfah cost?
It is set after the inspection, because the price follows the type of infestation, the size of the space, how far it has spread and the number of visits it needs. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Al Rusayfah.
Nearby districts we cover
Other services in Al Rusayfah
Other services we provide to residents of Al Rusayfah.
-
Water tanks
Water tank cleaning
-
Water tanks
Water tank sterilization
-
Water tanks
Tank leak repair
-
Residential
Cockroach control
Need water tank sealing in Al Rusayfah? Tell us what you saw and we will tell you what it needs
We reach Al Rusayfah at a time we agree, and you get the full cost before we start.