Disinfection in Khadra Makkah
Khadra is a newly developing district on King Faisal Road experiencing continuous building, with fine dust rising from vacant plots between the new apartments and villas being raised. Disinfection here must focus on removing fine dust before applying disinfectant, and on treating what enters through cracks and gaps in freshly built walls where weather sealing is incomplete.
-
Targeted, not broadcast
Product goes into cracks and runways, never sprayed across open surfaces.
-
Told before we start
What we will use, where it goes, and what to cover or move before we arrive.
-
A follow-up visit
We return after the first treatment, because what survives it does not show on the day.
-
Homes and businesses
Apartments and villas, and kitchens and stores that need a record of each visit.
Why they keep coming back in Khadra
Ongoing construction leaves fine airborne dust that settles indoors easily, and new villas and flats have sealed gaps at entry points and window frames that have not been finished or weather stripped. The method is set out in full on how we approach Disinfection.
Fine dust and airborne particles
Vacant plots and continuous construction around the district raise the concentration of fine dust in the air. This settles on every surface and seeps into newly built homes, blocking the disinfectant's pores before it reaches the germ. Deep cleaning first is more critical here than in established districts, because new dust enters every day.
Construction gaps and incomplete sealing
New buildings have not finished all their sealing work, and gaps around pipes and poor insulation leave open entry points for insects and external contamination. The disinfectant must cover not only surfaces but also the gaps and seals around these weak points, so treatment takes longer.
Water gathering and damp penetration
Unfinished schemes and vacant plots collect rainwater and stormwater, and this moisture seeps through the outer walls of buildings built next to them. Areas near foundations stay damp and mould appears quickly, requiring special disinfection care for this persistent moisture.
Khadra on the map
Khadra sits about 2 km from Muad and about 3 km from Badr.
Open in Google MapsWhat we look at before the product is chosen
A district straddling the Haram boundary on King Faisal Road, with new residential schemes still under continuous construction, ground floor shops and food centres, and schools and municipal services lagging behind the building pace.
The touch points
Touch points in the new flat are few: doors, handles and shared areas have not been used much yet, so contamination is light, but construction workers have touched them and may have left germs from the building site.
Porous surfaces
Porous surfaces in new building are often fresh: new paint, fresh plaster and new drywall can leak moisture quickly. The disinfectant needs longer to absorb properly on these surfaces before it dries out completely.
The finish itself
The finish in Khadra is mixed: some flats are fully complete and others are still unfinished. Tiles, plaster and paint are new and absorb disinfectant quickly, so we focus on moisture control and proper drying time between surfaces.
The air conditioning unit
New air conditioning units have not run long, so pipes and filters are relatively clean. But building dust may have entered the units during construction, so we clean the filter first, then treat the outlet and mesh carefully.
Floor traps
New floor traps are clean but may be empty of water if the building has not been used. We check that water sits in the seal and treat it with a disinfectant that stays and protects until the next use.
Shared entrances and stairs
Shared stairs and entry doors in new apartment buildings are clean but construction dust rises to them. We focus on steps and edges where dust collects, and treat the main door and handles with concentrated effort.
How we work
-
1
Walk the space and list the surfaces
We go through the rooms and mark the touch points, the porous surfaces and the finishes, then ask what prompted the call: illness at home, moving into a new place, building work, or a smell that arrived out of nowhere.
-
2
Clean what we are about to treat
We take the film of dust and grease off the surfaces that are in scope, so the product reaches the surface itself. This is preparation for the treatment, not general house cleaning.
-
3
Apply it, and hold the contact time
Hand work on the touch points, a product matched to each surface, and the surface left visibly wet for as long as that material needs before it is dried off. Cold fogging comes last, for what a cloth cannot reach.
-
4
Ventilate and hand back
We open the place up, rinse food preparation surfaces with water, and tell you when each room goes back into use. We give you that timing on the call, because it changes with the product and the space.
What a disinfection visit includes
-
A surface and touch point survey
What gets treated, and with what, settled before anything is opened.
-
Soil off first, then the disinfectant
The greasy film comes off first, then a product that stays wet for the contact time it needs.
-
Floor traps and the air conditioning drain
Floor traps, sink outlets and the drain tray, which is where most smells actually begin.
-
Cold fogging for the space
For upward faces and corners a cloth never reaches, done as the last thing before we leave a room.
-
Ventilation and use instructions
What gets rinsed with water, what is left alone, and when each room goes back into use.
-
A scheduled repeat when it is needed
For shared entrances and places people pass through every day, because a disinfectant leaves nothing behind to stop the next contact.
The character of Khadra
New development: ongoing construction and vacant plots between the homes
A newly developing district means a constantly changing environment: buildings are being finished, dust and particles from construction sites enter homes continuously. Disinfection here is not permanent protection but regular maintenance, because external sources of contamination have not stopped yet, and treatment needs repeating more often than in settled districts.
Questions about this district
How do we protect the flat from dust entering during ongoing construction around us?
Disinfection alone will not help if dust enters every day. Seal gaps around pipes, air conditioning units and window frames with weatherproofing materials first, then disinfect what is inside. We check these points as part of the visit and point out gaps that need fixing to keep dust out.
Does disinfection remove fine dust from new furniture and clothing we bring in?
The disinfectant does not remove dust, it covers it. Wipe furniture and clothing with a cloth and vacuum first, then apply disinfectant to the surfaces. Clothes and bedding are washed separately in a washing machine, and disinfection protects surfaces, it does not clean dust from fabrics.
Is it better to disinfect a new flat before moving in or after we arrive?
Before moving in is easier and better. The flat is empty so treatment is quick and surfaces dry without obstruction, and the disinfectant settles evenly on every surface. After moving in, furniture, carpets and personal items block access to actual surfaces and slow the work down.
Moisture entering from vacant plots nearby, does disinfection solve that problem?
Disinfectant stops mould growing on existing wet surfaces but does not remove the moisture itself. If walls stay damp all the time, they need moisture barriers on the outside and better ventilation inside. We treat surfaces affected by mould, but the root problem needs building repairs to fix properly.
How often should we disinfect per year in a district with active construction and high dust?
It depends on how much building is happening nearby and whether you open windows daily. If you keep windows open often and building is active close by, once every three months is reasonable. If you seal windows well and construction is finishing, twice a year is enough.
Do floor traps in new flats need different disinfection treatment than in older flats?
New traps are usually clean but may be empty and allow drain smells to rise up into the room. We treat the water seal with a disinfectant that stays in place and protects, and we advise you to pour boiling salted water down every two weeks to keep the seal strong.
How much does disinfection in Khadra cost?
It is set after the inspection, because the price follows the type of infestation, the size of the space, how far it has spread and the number of visits it needs. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Khadra.
Other services in Khadra
Other services we provide to residents of Khadra.
-
Residential
Cockroach control
-
Residential
Bed bug control
-
Residential
Termite control
-
Residential
Rodents and mice
-
Residential
Mosquito control
-
Residential
Fly control
-
Residential
Ant control
-
Residential
Gecko control
-
Residential
Scorpion control
-
Residential
Snake control
-
Residential
Flea control
-
Residential
Bird and pigeon control
-
Residential
Preventive treatment
-
Commercial
Annual contracts
-
Commercial
Restaurants and cafes
-
Commercial
Hotels and apartments
-
Commercial
Warehouses and factories
-
Commercial
Schools and nurseries
-
Commercial
Retail and malls
-
Commercial
Rest houses and farms
-
Commercial
Fumigation
-
Water tanks
Water tank cleaning
-
Water tanks
Water tank sterilization
-
Water tanks
Water tank sealing
-
Water tanks
Tank leak repair
Need disinfection in Khadra? Tell us what you saw and we will tell you what it needs
We reach Khadra at a time we agree, and you get the full cost before we start.