A technician washing the inside wall of a water tank with a high pressure hose
What our clients rate us

Water tank sterilization in Al Mansour Makkah

Al Mansour is an old commercial district strung along Prince Mansour Street, the long artery running from Al Hajoun Road south to Ibrahim Al Khalil Street. Retail shops and small markets occupy ground floors with tanks mounted above or beside them. Tanks serve shops, food businesses and residents together, requiring very regular cleaning.

  • Potable-rated materials

    Linings and disinfectants cleared for drinking water tanks, not general-purpose products.

  • You get the downtime first

    How many hours the tank is out of service, told before we start rather than after we finish.

  • A first-draw flush

    We run the first draw off after refilling, and the tank is not handed back until the water runs clear.

  • Ground and roof tanks

    Villas, apartment blocks and premises that need a written record of each visit.

Why the job is different in Al Mansour

Buildings are old and mid-rise, with tanks varying in size and mounted on rooftops or in remote corners. The method is set out in full on the full Water tank sterilization page.

The first reason

Tanks serving retail and food shops

Retail shops, small restaurants, bakeries and stores consume water continuously through the day. Food scraps and grease may reach the tank through unsecured or corroded pipes.

The second reason

Al Mansour Street traffic and dust

The main street is congested with traffic, dust, smoke and fumes. Particles enter tanks through vents and openings, and sediment contains metallic particles and airborne dust.

The third reason

Old tanks on crowded, mixed rooftops

Rooftops are tight and may hold multiple tanks side by side or in various corners. Maintenance and cleaning require coordination with owners and shop operators.

Al Mansour on the map

Al Mansour sits about 0.5 km from Al Tandabawi and about 1.5 km from Al Shubaikah.

Open in Google Maps
Before treatment

What we read inside the tank before anything starts

An old commercial district along Prince Mansour Street, running from Al Hajoun Road south to Ibrahim Al Khalil Street and the middle ring road. Ground floor shops and small markets line the street with ageing apartment blocks above, and the Sheikh Ibn Hassan Mosque stands among them near the Al Hindawiyah boundary.

Fine wet sand seen close up

Sediment on the floor

Sediment contains metallic particles, dust, rust flakes from old pipes and contaminants from shops and the street.

A concrete wall carrying a damp green layer

The slime film on the wall

Slime and biofilm accumulate rapidly due to heavy use and pollution from shops and the busy street.

A plastic water tank standing on a rooftop

Light and heat

Pipes connected to the tank are old and may be corroded or cracked, allowing contaminant leakage.

A concrete surface carrying fine cracks

The lining and any cracking

Moisture and heat from the busy street and rooftop sun accelerate bacterial growth.

A metal cover over a water tank opening

The lid and the openings

The microbial nest lies in sediment, rust flakes and organic matter from shop activity.

A glass of water on a kitchen counter

What shows up at the tap

Off-flavours and colour shifts in water signal advanced contamination from environmental pollutants and rust.

How we work

  1. 1

    Inspect and record the condition

    We open the hatch and work through what the tank is made of and how big it is, how deep the sediment lies, the state of the lining, whether the lid and the overflow seal, and whether there is a crack that has to be repaired before any sterilizing.

  2. 2

    Drain and lift the sediment out

    The water goes out, then the silt and sand are lifted off the floor by suction rather than pushed toward the outlet, because pushing them sends them into the house pipework and the heater.

  3. 3

    High pressure wash

    Walls, floor, corners and the area around the outlet, until the slime film is completely gone. This is the step that makes the sterilizing after it mean anything.

  4. 4

    Sterilize, rinse, then return to service

    The sterilizing agent goes onto the walls, the floor and the underside of the lid and is left for its contact time, then we rinse, refill and run the furthest tap until the whole line is clear.

What water tank sterilization includes

  • A technician inspecting with a flashlight

    A recorded inspection

    Material, capacity, sediment depth, the state of the lining, the lid and the overflow, all before any work begins.

  • A metal floor drain

    Draining and sediment removal

    The water out, and the silt and sand lifted off the floor instead of being pushed into the outlet and the house pipework.

  • A spray nozzle in close detail

    High pressure washing

    Walls, corners and around the outlet, until the biofilm that no disinfectant penetrates has gone.

  • A spray nozzle in close detail

    Sterilizing the internal surfaces

    A sterilizing agent meant for drinking water tanks, applied to the walls, the floor and the underside of the lid, and left for its contact time.

  • A clean kitchen counter after treatment

    Line flush and aftercare

    Rinse, refill and a flush from the furthest tap, when the water is usable again, and what to change in the filter afterwards.

  • The visit report being written on a clipboard

    The next cycle

    We agree the right interval for your tank from how it is filled, how much sun it takes and the condition of the lid.

The character of Al Mansour

Commercial area: offices, showrooms and small stores

Al Mansour is a mixed commercial quarter, meaning tanks serve diverse uses. Retail and food shops provide additional contamination sources and the main street exposes tanks to dust and external pollution. Cleaning requires special attention to piping and sealing against leakage.

Questions about this district

Can food scraps from shops reach the tank?

They may if pipes are not sealed or if leakage occurs from shops. This requires inspection of internal and external piping during cleaning.

Does street dust cause water quality problems?

Yes. Dust and particles enter through vents and openings, forming heavy mineral sediment at the tank floor.

How often should a shop tank in Al Mansour be cleaned?

At least every three months, and possibly more often if the shop uses water heavily.

Should shop tanks be separate from residential tanks?

Ideally yes, but in Al Mansour one tank often serves both shop and residents together.

Does replacing old pipes reduce food contamination?

Yes. Corroded old pipes leak and admit contaminants. Replacement with sealed pipes improves water quality.

Does a tank on the main street suffer more pollution?

Yes. Heavy traffic means more dust and biological pollution from exhaust fumes and street debris. Good tank covers and proper ventilation are essential.

How much does water tank sterilization in Al Mansour cost?

It is set after the inspection, because the price follows the type of infestation, the size of the space, how far it has spread and the number of visits it needs. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Al Mansour.

Nearby districts we cover

Other services in Al Mansour

Other services we provide to residents of Al Mansour.

All services

Need water tank sterilization in Al Mansour? Tell us what you saw and we will tell you what it needs

We reach Al Mansour at a time we agree, and you get the full cost before we start.

Call now +966 57 336 7012 WhatsApp