A technician washing the inside wall of a water tank with a high pressure hose
What our clients rate us

Water tank sterilization in Al Haram Makkah

Hajj and Umrah hotels around the Grand Mosque serve thousands of pilgrims daily, and their tanks face intense demand from continuous heavy use. Water travels through long lines from hotel towers and building rooftops, and constant moisture and heat accelerate sediment and biofilm buildup. Precise sterilization is essential because pilgrims and Umrah visitors cannot afford contaminated water during their rituals.

  • Potable-rated materials

    Linings and disinfectants cleared for drinking water tanks, not general-purpose products.

  • You get the downtime first

    How many hours the tank is out of service, told before we start rather than after we finish.

  • A first-draw flush

    We run the first draw off after refilling, and the tank is not handed back until the water runs clear.

  • Ground and roof tanks

    Villas, apartment blocks and premises that need a written record of each visit.

Why the job is different in Al Haram

Five-star hotels and high-rises in Al Haram consume thousands of litres daily from their tanks, and the rapid water turnover places constant pressure on water quality. The method is set out in full on Water tank sterilization in detail.

The first reason

Massive hotel tower tanks at extreme heights

Hotel towers like Al Bait and Jabal Omar and others house enormous tanks on very high rooftops. Water descends through long complex piping and sediment accumulates rapidly at tank base and throughout the lines.

The second reason

Intense and continuous use by pilgrims and Umrah visitors

Thousands of pilgrims use bathrooms, restaurants, food preparation and drinking water daily in each hotel. High consumption means fast water turnover but equally fast dirt accumulation.

The third reason

Heat and humidity accelerate biofilm and algae growth

Al Haram is surrounded by heat-absorbing surfaces and massive towers that trap warmth. Biofilms grow very rapidly in these conditions, especially in sections where water stagnates briefly.

Al Haram on the map

Al Haram sits about 0.5 km from Harat Al Bab Wa Al Shamiyah and about 1 km from Al Qararah Wa Al Naqa.

Open in Google Maps
Before treatment

What we read inside the tank before anything starts

The densest commercial zone in Jeddah, wrapping directly around the Grand Mosque. Luxury hotel towers, souks and shrines fill every gap between Jabal Abu Qubais, Jabal Qaiqaan, Abraj Al Bait, and pilgrimage activity keeps every tank under daily load year-round.

Fine wet sand seen close up

Sediment on the floor

Mineral sediment accumulates at the base and corners, especially calcium and magnesium from the city's hard water supply.

A concrete wall carrying a damp green layer

The slime film on the wall

Biofilms coat tank walls in grey or brown layers and grow rapidly in the high heat surrounding hotel towers.

A plastic water tank standing on a rooftop

Light and heat

Pipe lines from tank to distant taps carry sediment deposits up to centimetres deep in older pipes.

A concrete surface carrying fine cracks

The lining and any cracking

High sustained heat and moisture year-round from heat-absorbing surfaces and massive towers accelerates biological growth.

A metal cover over a water tank opening

The lid and the openings

Deep and enormous tanks on high-rises hold water static at the base longer, allowing deeper sediment formation.

A glass of water on a kitchen counter

What shows up at the tap

Water discolouration or off-odours signal biofilm or bacterial presence in the tank or pipes.

How we work

  1. 1

    Inspect and record the condition

    We open the hatch and work through what the tank is made of and how big it is, how deep the sediment lies, the state of the lining, whether the lid and the overflow seal, and whether there is a crack that has to be repaired before any sterilizing.

  2. 2

    Drain and lift the sediment out

    The water goes out, then the silt and sand are lifted off the floor by suction rather than pushed toward the outlet, because pushing them sends them into the house pipework and the heater.

  3. 3

    High pressure wash

    Walls, floor, corners and the area around the outlet, until the slime film is completely gone. This is the step that makes the sterilizing after it mean anything.

  4. 4

    Sterilize, rinse, then return to service

    The sterilizing agent goes onto the walls, the floor and the underside of the lid and is left for its contact time, then we rinse, refill and run the furthest tap until the whole line is clear.

What water tank sterilization includes

  • A technician inspecting with a flashlight

    A recorded inspection

    Material, capacity, sediment depth, the state of the lining, the lid and the overflow, all before any work begins.

  • A metal floor drain

    Draining and sediment removal

    The water out, and the silt and sand lifted off the floor instead of being pushed into the outlet and the house pipework.

  • A spray nozzle in close detail

    High pressure washing

    Walls, corners and around the outlet, until the biofilm that no disinfectant penetrates has gone.

  • A spray nozzle in close detail

    Sterilizing the internal surfaces

    A sterilizing agent meant for drinking water tanks, applied to the walls, the floor and the underside of the lid, and left for its contact time.

  • A clean kitchen counter after treatment

    Line flush and aftercare

    Rinse, refill and a flush from the furthest tap, when the water is usable again, and what to change in the filter afterwards.

  • The visit report being written on a clipboard

    The next cycle

    We agree the right interval for your tank from how it is filled, how much sun it takes and the condition of the lid.

The character of Al Haram

Commercial area: offices, showrooms and small stores

The dense commercial zone and luxury hotels mean enormous tanks on very high rooftops with long complex piping. Treatment requires powerful pumps and crews working at height, and sterilization must reach the furthest taps in lower floors.

Questions about this district

Why does sediment accumulate faster in Al Haram hotel tanks than in other hotels?

Intense use means water enters and drains at high speed. But the long piping and enormous tanks provide greater opportunity for minerals and sediment to settle.

Is a single annual sterilization enough for hotels in Al Haram?

No. Hotels in Al Haram need sterilization more frequently. Intense use and heat accelerate biofilm and sediment formation, so sterilization every 3-4 months is better.

Do the long pipes from tank to distant taps need separate treatment?

Yes. We pressure-wash the pipes and sterilize them via the pump lines. Long pipes may carry mineral deposits and biofilm.

Can tank water quality affect pilgrims and Umrah visitors during ritual?

Yes. Contaminated water can cause minor or serious health issues. Pilgrims and visitors require the best water quality possible.

Does mains water quality affect how fast contamination builds up in the tank?

Yes. If municipal water carries high sediment or mineral content, tank buildup becomes much faster.

Why do we use high pressure to wash walls instead of just regular water?

Biofilms and algae bond firmly to walls. High pressure lifts them efficiently without leaving residue.

How much does water tank sterilization in Al Haram cost?

It is set after the inspection, because the price follows the type of infestation, the size of the space, how far it has spread and the number of visits it needs. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Al Haram.

Other services in Al Haram

Other services we provide to residents of Al Haram.

All services

Need water tank sterilization in Al Haram? Tell us what you saw and we will tell you what it needs

We reach Al Haram at a time we agree, and you get the full cost before we start.

Call now +966 57 336 7012 WhatsApp