A technician washing the inside wall of a water tank with a high pressure hose
What our clients rate us

Water tank sterilization in Maqam Makkah

Maqam is a northern extension of Al Sharai between Al Usaylah and Al Khadra, with new residential schemes. Tanks here are new but water from nearby wells carries mineral sediment, and new apartment buildings and recently built mosques such as Al Firdaws and Dhu Al Nurayn require regular sterilization. The main risk is that new tanks receive no routine maintenance because new residents are unaware of the need.

  • Potable-rated materials

    Linings and disinfectants cleared for drinking water tanks, not general-purpose products.

  • You get the downtime first

    How many hours the tank is out of service, told before we start rather than after we finish.

  • A first-draw flush

    We run the first draw off after refilling, and the tank is not handed back until the water runs clear.

  • Ground and roof tanks

    Villas, apartment blocks and premises that need a written record of each visit.

Why the job is different in Maqam

Most apartment buildings were constructed in the past two years and tanks have filled from newly drilled wells. Residents are new and awareness of tank maintenance is low. The method is set out in full on the full Water tank sterilization page.

The first reason

New wells and mineral-rich water

Recently drilled wells in Maqam provide water but it is high in calcium, magnesium and iron. Mineral sediment settles in tanks rapidly, especially in heat-exposed tanks. New pipelines lose flow due to sediment buildup.

The second reason

New residents and low maintenance awareness

Residents in Maqam are new to the quarter and tanks are new. Many do not know tanks need regular sterilization. Tanks can go years without cleaning, allowing sediment and bacteria to accumulate.

The third reason

New mosques and large storage tanks

Al Firdaws and Dhu Al Nurayn mosques are newly built with large tanks. These tanks serve ablution water, cooking and drinking water. Sterilization is essential due to heavy use and the need for clean safe water.

Maqam on the map

Maqam sits about 3 km from Yamamah and about 3.5 km from Badr.

Open in Google Maps
Before treatment

What we read inside the tank before anything starts

A recent northern extension of Al Sharai between Al Usaylah and Al Khadra, new residential schemes and apartment buildings. The Haram boundary marker on King Faisal Road marks its southern edge, new mosques like Al Firdaws and Dhu Al Nurayn cluster in the south, and vacant plots climb towards the Al Shifa hills to the north.

Fine wet sand seen close up

Sediment on the floor

Mineral sediment from calcium and magnesium accumulates at the base and on walls because water is very hard.

A concrete wall carrying a damp green layer

The slime film on the wall

Algae and bacteria grow quickly in new tanks because pipelines and tanks start clean.

A plastic water tank standing on a rooftop

Light and heat

New copper and iron pipelines need cleaning from mineral sediment that reduces flow.

A concrete surface carrying fine cracks

The lining and any cracking

Rooftop tanks exposed to sun encourage green algae and bacterial growth.

A metal cover over a water tank opening

The lid and the openings

Underground tanks in lower storeys are protected but sediment builds at the base.

A glass of water on a kitchen counter

What shows up at the tap

New residents do not routinely inspect tanks so sterilization may not occur until a year or more after first filling.

How we work

  1. 1

    Inspect and record the condition

    We open the hatch and work through what the tank is made of and how big it is, how deep the sediment lies, the state of the lining, whether the lid and the overflow seal, and whether there is a crack that has to be repaired before any sterilizing.

  2. 2

    Drain and lift the sediment out

    The water goes out, then the silt and sand are lifted off the floor by suction rather than pushed toward the outlet, because pushing them sends them into the house pipework and the heater.

  3. 3

    High pressure wash

    Walls, floor, corners and the area around the outlet, until the slime film is completely gone. This is the step that makes the sterilizing after it mean anything.

  4. 4

    Sterilize, rinse, then return to service

    The sterilizing agent goes onto the walls, the floor and the underside of the lid and is left for its contact time, then we rinse, refill and run the furthest tap until the whole line is clear.

What water tank sterilization includes

  • A technician inspecting with a flashlight

    A recorded inspection

    Material, capacity, sediment depth, the state of the lining, the lid and the overflow, all before any work begins.

  • A metal floor drain

    Draining and sediment removal

    The water out, and the silt and sand lifted off the floor instead of being pushed into the outlet and the house pipework.

  • A spray nozzle in close detail

    High pressure washing

    Walls, corners and around the outlet, until the biofilm that no disinfectant penetrates has gone.

  • A spray nozzle in close detail

    Sterilizing the internal surfaces

    A sterilizing agent meant for drinking water tanks, applied to the walls, the floor and the underside of the lid, and left for its contact time.

  • A clean kitchen counter after treatment

    Line flush and aftercare

    Rinse, refill and a flush from the furthest tap, when the water is usable again, and what to change in the filter afterwards.

  • The visit report being written on a clipboard

    The next cycle

    We agree the right interval for your tank from how it is filled, how much sun it takes and the condition of the lid.

The character of Maqam

New development: ongoing construction and vacant plots between the homes

Maqam is a new-development quarter with new residents and low awareness of tank maintenance. Buildings and tanks are modern but require regular sterilization. Treatment focuses on removing mineral sediment from wells and regular sterilization because residents may not request maintenance until a problem appears.

Questions about this district

Why do new tanks in Maqam need sterilization?

New tanks filled from local wells that carry minerals and iron. Bacteria begin to grow from the first filling and mineral sediment accumulates on walls.

Is water in Maqam hard?

Yes, the water is high in calcium and magnesium causing high hardness. This settles in tanks and pipelines and reduces pressure.

Does sterilization solve the low water pressure problem?

Sterilization removes bacteria but does not remove mineral sediment. We need high-pressure washing before sterilization to clear sediment from pipelines.

What is the difference between sterilizing a household tank and a mosque tank?

Mosque tanks are larger and more heavily used. The sterilization method is the same but requires more detailed inspection and takes longer.

Do new residents know tanks need regular maintenance?

Many new residents do not. Tanks can go a year or more without maintenance, causing sediment and bacterial buildup.

Is sterilization safe for families and children?

Sterilization with approved agents is completely safe. After sterilization we rinse the tank and pipelines thoroughly and the water is safe for drinking and ablution.

How much does water tank sterilization in Maqam cost?

It is set after the inspection, because the price follows the type of infestation, the size of the space, how far it has spread and the number of visits it needs. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Maqam.

Nearby districts we cover

Other services in Maqam

Other services we provide to residents of Maqam.

All services

Need water tank sterilization in Maqam? Tell us what you saw and we will tell you what it needs

We reach Maqam at a time we agree, and you get the full cost before we start.

Call now +966 57 336 7012 WhatsApp